I have tested the following with 3.10.2 : My server is behind my router(NAT) , listening to ip 192.168.0.10. My router do not have static IP, so I managed to do it with dyndns. The interesting point is that I have managed to establish a connection with 2 softphones(xlite), that were behind a different NAT, using stunserver.org. The signaling was fine, the rtp streaming was perfect(meaning the voice quality) but I faced 2 problems: a. Each call, had only 30 seconds of "life" (limitation of stunserver???) b. The DTMF of the softphone were not working for having access e.g. to voicemail(normaly, when the server and the softphones are behind the same NAT, there were no problem)
Are these problems normal ? Thank you -----Original Message----- From: Michael Picher [mailto:[email protected]] Sent: Thursday, February 19, 2009 12:10 PM To: dimitris(yahoo) Cc: [email protected] Subject: [Bulk] Re: [sipx-users] static ip address Dimitris, This won't work with 3.10.x. You'll need some sort of SBC in line for the NAT traversal. Mike On Thu, 2009-02-19 at 09:08 +0200, dimitris(yahoo) wrote: > > Hi there, > > I have in mind , just for testing reasons, to connect my sipx > installation (3.10.2) to the internet, behind NAT using STUN services. > My question is the following: > > Given that I do not have a static IP, is it possible to configure the > "listening IP" of my sipx after my first installation ? > > > > Thank you, > > Dimitris > > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
