Thanks for all your suggestions. By the way, I do have an AudioCodes MP-108 with 5 POTS connected to it. I did try forwarding all incoming call to a specific user, but that did not work for me. I will try Michael's suggestion and let you know if it works.
Thanks for your help. -Cesar ----- Original Message ----- From: "Michael Picher" <[email protected]> To: "Tony Graziano" <[email protected]>, [email protected] Cc: [email protected] Sent: Monday, March 23, 2009 2:09:35 PM GMT -08:00 US/Canada Pacific Subject: Re: [sipx-users] How do I bypass the AutoAttendant? You can have them dial a user... the phantom I setup is just a user. > -----Original Message----- > From: [email protected] [mailto:sipx-users- > [email protected]] On Behalf Of Tony Graziano > Sent: Monday, March 23, 2009 2:58 PM > To: [email protected] > Cc: [email protected] > Subject: Re: [sipx-users] How do I bypass the AutoAttendant? > > As far as I could remember analog gateways could never call users, just > hunt groups or AA's (this was the case with both AudioCodes and Patton > unless someone can tell me something has changed within sipx to make it > no longer an issue). > > >>> milosz <[email protected]> 03/23/09 2:50 PM >>> > i'm a little confused here. are you saying that gateways cannot send > inbound calls to users? or just analog gateways? how can that > possibly be true (unless you are talking about the specific software > limitations of specific gateways)? > > On Mon, Mar 23, 2009 at 1:16 PM, Tony Graziano > <[email protected]> wrote: > > This does not work if the call is coming in via a gateway (i.e. > POTS). From what I recall incoming calls can come into users via DID > only and not by internal extension. So this means if you are using a > non-siptrunk or no DID's, you need to do it the way michael suggested > because gateways are only able to forward to the AA or huntgroups, but > not to users. > > > >>>> "Scott Lawrence" <[email protected]> 03/23/09 1:05 PM >>> > > On Sun, 2009-03-22 at 19:57 -0700, Cesar Artiga wrote: > >> Silly request: > >> > >> I have a specific application that requires me to bypass the > autoattendant all together, so calls are answered directly by the > Operator. Could someone give me a few pointers on how to do this? > > > > Configure your gateway to send the incoming call to a number assigned > to > > a normal user. > > > > _______________________________________________ > > sipx-users mailing list > > [email protected] > > List Archive: http://list.sipfoundry.org/archive/sipx-users > > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > > > > _______________________________________________ > > sipx-users mailing list > > [email protected] > > List Archive: http://list.sipfoundry.org/archive/sipx-users > > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
