On Mon, 2009-05-11 at 15:56 -0400, Nathaniel Watkins wrote: > The following scenario fails if I have more than 3 extension in my > huntgroup and set a fallback destination as an auto-attendant: > > Incoming call from an 8 port audiocodes fxo gateway is routed to a > huntgroup (extension 111). I have a fallback Destination of 119 > (which is an automated attendant). > > Everything works fine if I dial the huntgroup directly (i.e. another > ip phone). When I route the call from the audiocodes gateway, the > extensions all ring as expected. However if there are more than 3 > extensions in the sequence the call does not get sent to the fallback > destination of 119. If I have 3 or less extensions in the Sequence it > works properly. > > Also, if I enter an external number (i.e. have it send it to my cell > phone) it works as expected.
Check the timeout of the call in the gateway - how long do you set it to ring at each destination and when does the gateway time out the call? _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
