Hi Aidil, This is how I do the provisioning:
- Edit your spa941.cfg in your tftproot directory (and other spa9XX.cfg if any) - Replace $MA with $MAU - Edit your Linksys default configuration in /etc/sipxbpx/linksys/default.cfg - Replace $MA with $MAU The last two steps will address issue when you add new Linksys model. The $MA refers to MAC address using lower case hex digits. Please refers to SPA provisioning guide (http://track.sipfoundry.org/secure/attachment/16445/SPA_Provisioning_v3.pdf). HTH, Ronny ----- Original Message ----- From: Boy Aidil Sjam Newsgroups: gmane.comp.telephony.pbx.sipfoundry.general To: [email protected] Sent: Wednesday, June 24, 2009 7:11 PM Subject: Linksys SPA941 IP Phone - Provisioning Issues Hi All, I think there are some issues with Linksys SPA IP Phone with sipXecs ver.4.0. I used Linksys SPA941 First, when I used Discover Devices, the IP Phone was discovered with the correct mac address, IP address, and Vendor, but there's no single model I can choose. Second, I manually add the phone from the phone menu, I assign the line and used all the default value. After I reset the phone to factory default, set profile rule to /spa$MA.cfg, then reboot the phone, the phone can not registered. Try to restart the sipX server, reconfigure the phone on server, and reconfigure the phone but still the same. Then I ran wireshark to capture the communication between the phone to the server. I found out that the Linksys request file: /spa000e08d09436.cfg and cannot find the file on the server. I checked on the tftp server root directory on the server, I found there's a spa00E08D09436.cfg (all the MAC address characters in the capital). After I rename the file, now the Linksys able to load the configuration. This problem never found on sipXecs ver.3.10. 3 Regards, B. Aidil DISCLAIMER: Information in this message is confidential and may be legally privileged. It is intended solely for the addressees. Access to this message by anyone else is unauthorised. If you are not the intended recipient, any disclosure, copying, or distribution of the message, or any action or omission taken by you in reliance on it, is prohibited and may be unlawful. Please immediately contact the sender if you have received this message in error. ------------------------------------------------------------------------------
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
