Actually, you might be able to do this in the phone configuration if you are using Polycoms... Go into the line in the phone configuration and then select Call Diversion.
Mike -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of heros Sent: Friday, June 26, 2009 3:18 AM To: 'Dale Worley' Cc: [email protected] Subject: [sipx-users] R: Get the busy tone on busy phone Yes Dale, Thank you. I know this particular. But I'd like Voicemail on "no answer". I don't want voicemail "on busy". The only solution is forwarding to a autoattendant with a preregistered busy message. It's not very good because the PSTN line is answered but this is the only way I found. Maybe a second solution is forwarding to a "dummy" extension for which voicemail has been disabled. In this second case I have to dedicate a user Heros -----Messaggio originale----- Da: Dale Worley [mailto:[email protected]] Inviato: giovedì 25 giugno 2009 18.26 A: heros Cc: [email protected] Oggetto: Re: [sipx-users] Get the busy tone on busy phone On Thu, 2009-06-25 at 18:06 +0200, heros wrote: > The problem is that instead of getting the busy signal > I always get the voicemail message. Is there a way to get the busy > tone on busy? If you disable voicemail for a particular extension, then you will get the busy signal. Dale _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
