Hello, i installed and setup sipxecs and i'm able to register phones from local subnet and make local calls + calls to siptrunk (alcatel oxe).
I would like to use remote workers which are behind NAT. I followed the "configuring remote workers cheatsheet". The public IP is static, and port is 7070. Here is my configuration: Servers -> nat -> public IP and port 7070. Internet calling -> "Enable Internet Calling" is unchecked, intranet domain and subnet is set. Internet calling -> Nat traversal, both checked The internal SBC has public port 7070, external port 8080. On the firewall, the public port 7070 is forwarded to sipxecs intranet IP:5060, RTP ports are forwarded as well. When the phone (aastra 53i) behind NAT want's to register, it fails with SIP/2.0 401 Unauthorized, although the credentials are correct and are present in the REGISTER message from the phone. What configuration option am i missing? Many thanks for advice, Peter _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
