> > Hello, > > i installed and setup sipxecs and i'm able to register phones > from local subnet and make local calls + calls to siptrunk > (alcatel oxe). > > I would like to use remote workers which are behind NAT. I > followed the "configuring remote workers cheatsheet". The > public IP is static, and port is 7070. > Here is my configuration: > > Servers -> nat -> public IP and port 7070. > Internet calling -> "Enable Internet Calling" is unchecked, > intranet domain and subnet is set. > Internet calling -> Nat traversal, both checked The internal > SBC has public port 7070, external port 8080. > On the firewall, the public port 7070 is forwarded to sipxecs > intranet IP:5060, RTP ports are forwarded as well. > > When the phone (aastra 53i) behind NAT want's to register, it > fails with SIP/2.0 401 Unauthorized, although the credentials > are correct and are present in the REGISTER message from the phone. > > What configuration option am i missing? Many thanks for advice, >
If you manage to get a 401 back from the sipXecs, this suggests that your remote phone and sipX can talk to each other. I do not know why sipXecs rejects the phone's credentials but it is usually caused by wrong password, wrong domain or invalid parameters present in the to: field. Please send me a snapshot of the problem and I'll try to understand why your registration is not accepted. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
