Check with sipviewer what the handset are dialing out. There a good chance when they dial out they try perhaps [email protected] when it should be [email protected]
http://sipx-wiki.calivia.com/index.php/Display_SIP_message_flow_using_Sipviewer Hope that helps narrow down the issues, Christopher Coleman On Tue, Sep 1, 2009 at 3:22 PM, Derek Bartolo < [email protected]> wrote: > Hey guys have a weird issue. We’re running 4.0.1 and I have added 2 users > extensions 221 and 222 which are Spectralink 8030 handsets. When I try to > call a polycom desk phone (Ext 246) I get “Rejected Request timeout” on the > handset. However if I dial 222 or 221 from the desk phone (246) the handsets > ring! Now to rule out that the handsets are not communicating with our sipx > box I dial 0 and get the auto attendant. From there I can dial the other > handset or desk set. So basically I can’t dial an internal extension unless > I use the auto attendant. > > > > Oh as well I checked the registrations and both handsets with the correct > IP Addresses and Extensions are there so the handsets are definitely being > registered to the sipx box. > > > > Any help would be great J > > > > Derek Bartolo > > Technical Support > > Comsource Technologies > > 3585 Laird Drive Unit 13 > > Mississauga Ontario > > [email protected]<[email protected]> > > 905-608-1400 ext 240 > > [image: CST-FinalLogo3] > > > > _______________________________________________ > sipx-users mailing list [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ >
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
