It seems that the LIP 6830 is sending to the wrong address. Do a search of
this mail list for music on hold, as there has been quite a bit of
discussion on it over the past few weeks.  I believe in one thread, it was
recommended to turn the music on hold off on the telephones themselves, and
rely on the sipXecs server to provide it.

There was discussion you should be able to find about the two sources
creating a timing issue - a race as it was explained.  I'm not sure if that
is your issue, but worth looking up the thread and following it for
suggestions.



-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Andres
Jaramillo
Sent: Monday, September 14, 2009 12:46 PM
To: [email protected]
Subject: Re: [sipx-users] Music on Hold, not sended (third post)

I just found the mapping rule :

<userPattern>~~mh~</userPattern>
 <permissionMatch>
     <transform>
        <url>&lt;sip:[email protected]:5120;</url>
     </transform>
</permissionMatch>

So the LIP send the INVITE to sip:[email protected]:5120  , that is correct
?
I dont have an external Media Server, is the same sip Server.

Sorry, I'm little confused,  I'm new on this.

Maybe , somebody can explain me how is the flow in this case, when an
external party (pstn phone) is placed on HOLD by a LIP 6830.
My media server is the same sipXserver, and all the calls to the pstn
pass trough a gateway Audiocode mendiant 1000

Thanks in advance,


2009/9/14 Damian Krzeminski <[email protected]>:
> Andres Jaramillo wrote:
>> Yes, fortunately the community exist !!
>>
>> And :
>>
>> I found this entry in  the sip server: Devices--> Phones--> SIP->
>> Advance Setting--> moh_url : [email protected]
>>
>> How the LIP phone knows who is ~~mh~ ??,   I need to put here my sip
>> server ip address ?
>
> Phone does know waht ~~mh~ is. sipXconfig however does know it and it
> generates internal mapping rule that redirects the calls to ~~mh~ with
> calls to real music on hold source. If you curious how it works check out
> the mappingrules.xml file...
>
>>
>> Im using an audicode mediant 1000  to pass to PSTN.
>>
>> Sorry for the inconvenience
>> Thanks, in advance
>>
>
> _______________________________________________
> sipx-users mailing list [email protected]
> List Archive: http://list.sipfoundry.org/archive/sipx-users
> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
> sipXecs IP PBX -- http://www.sipfoundry.org/
>



-- 
(@'.')@ @('.'@)
_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/

_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/

Reply via email to