sipXecs can only have one interface card. I'd add another interface to Monowall and route traffic to that itsp directly out that interface.
Mike -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jeff Gilmore Sent: Monday, November 02, 2009 10:17 AM To: [email protected] Subject: [sipx-users] Dual homed sipx server? I have a 4.0.2 server on an internal subnet inside of a Monowall firewall. This server is 1:1 NATed to an external IP address, and I have split DNS in place. I currently transport phone traffic along with the rest of my internet traffic offsite, but I am negotiating with a vendor who will give me dedicated bandwidth to their phone switch (on the same fiber as the internet traffic, but segmented out) with, I believe a different IP address. My question is, what is the best way to connect my server to this dedicated subnet for ITSP traffic? Should I add another interface card to the sipx server and dual home it, or just pass it through the m0n0wall in some way that guarantees high QOS? Thanks Jeff _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
