On the pots line, what type of gateway is it? ============================ Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431
Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ ----- Original Message ----- From: [email protected] <[email protected]> To: Picher, Michael <[email protected]>; Kyle Haefner <[email protected]>; [email protected] <[email protected]> Sent: Tue Dec 01 12:30:17 2009 Subject: Re: [sipx-users] Dual homed sipx server? So how is everyone dealing with NAT issues, then? Our ITSP recommends NOT having sipXecs behind NAT (we are having some problems that the ITSP thinks are NAT related), but I do not want to have public IP addresses for all of our phones. Mike Burden Lynk Systems, Inc e-mail: [email protected] Phone: 616-532-4985 PS: In case anyone cares or has any insight, the problem that we are having is that if I call a POTS line from the SIP phone and place the call on hold, sometimes the audio is one-way after the call resumes. A Wireshark trace outside the firewall shows that I still have RTP packets flowing in both directions, but the ITSP thinks that they have been incorrectly NAT'd. To further add to the mystery (and seed some doubt about whether the ITSP has correctly diagnosed the problem), the problem only occurrs when the call is placed on hold from my Polycom IP550. If I make the call from X-Lite and put the call on hold the problem doesn't happen. I've reqested additional IP Addresses from our ISP so I can disable NAT between the Internet and the sipXecs server. Once I've got everything reconfigured, I should be able to find out if the ITSP is right about what the problem is. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Picher, Michael Sent: Tuesday, November 10, 2009 6:33 AM To: Kyle Haefner; [email protected] Subject: Re: [sipx-users] Dual homed sipx server? If you say so chief... have fun with that. As far as all sipXecs services are concerned... 1 interface. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Kyle Haefner Sent: Thursday, November 05, 2009 3:02 PM To: [email protected] Subject: Re: [sipx-users] Dual homed sipx server? Actually it can, I set up both my servers to be dual homed. If you are careful with static routing you can run your sip network internal private network and you user portal on an external network. I haven't tried running sip on both interfaces, I imagine the proxy server can do it, maybe there is a problem with media...? Kyle > sipXecs can only have one interface card. > > I'd add another interface to Monowall and route traffic to that itsp > directly out that interface. > > Mike -- Kyle Haefner, M.S. Communication Systems Programmer Colorado State University Fort Collins, CO Phone: 970-491-1012 Email: [email protected] SIP: [email protected] _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
