Tony Graziano <tgraziano <at> myitdepartment.net> writes:
>
> Did you compare the vega config with the wiki example? Fyi - patton gateways
> handle euro isdn over there and work well with sipx.
>
> ============================
> Tony Graziano, Manager
> Telephone: 434.984.8430
> Fax: 434.984.8431
>
> Email: tgraziano <at> myitdepartment.net
>
> LAN/Telephony/Security and Control Systems Helpdesk:
> Telephone: 434.984.8426
> Fax: 434.984.8427
>
> Helpdesk Contract Customers:
> http://www.myitdepartment.net/gethelp/
>
> ----- Original Message -----
> From: sipx-users-bounces <at> list.sipfoundry.org
> <sipx-users-bounces <at> list.sipfoundry.org>
> To: sipx-users <at> list.sipfoundry.org <sipx-users <at> list.sipfoundry.org>
> Sent: Thu Nov 26 13:26:06 2009
> Subject: [sipx-users] Vegastream 50 and Cisco proeblems
>
> Hello
>
> I have setup Sipx, able to register poycoms - everything works well.
> I have encountered 2 problems -
>
> Problem 1
> Vegastream 50 Europa(ISDN), which will not dial. I have gone through the
> dial
> rules a million times, still it wont.
>
> Here is what I am using -
> Destination for ISDN-> SIP
> IF:9901,TEL:100,TA:192.168.10.99 (192.168.10.99 is Sipx)
>
> and from SIP->ISDN
> IF:1994,TEL:<1>
>
> I am able to recv call (only on 100, setting it as TA:sip_address doesnot
> work), but I cannot dial anything. Sipx is not even looking at this gateway
> (setup as unmanaged gateway)
>
> Problem 2
> Cisco 7975G
>
> The sip..conf.xml generated was wrong as mentioned by
> http://track.sipfoundry.org/browse/XX-5358
>
> Corrected it - But found that Ciscos cannot recv any call. Sipx would think
> they are not registered(they are registering well - as in registration
> screen).
> Ciscos can make calls.
>
> How to solve above problems?
> Thank you
>
> _______________________________________________
> sipx-users mailing list sipx-users <at> list.sipfoundry.org
> List Archive: http://list.sipfoundry.org/archive/sipx-users
> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
> sipXecs IP PBX -- http://www.sipfoundry.org/
>
The wiki is mostly outdated. Eg - All material on wiki is related to Cisco is
7940/60 which cant be even seen today.
If I setup as per the wiki, Vega box tries to dial the number stored in <tel>
See the log below - aftre i setup as per wiki
LOG: 26/11/2009 21:37:28.710 WEBSERV (C)R02C00
set .planner.profile.20.plan.1.dest="IF:9901,TEL<1>"
LOG: 26/11/2009 21:38:18.642 WEBSERV (C)R02C00
set .planner.profile.20.plan.1.dest="IF:9901,TEL:<1>"
LOG: 26/11/2009 21:38:25.440 WEBSERV (C)R02C00 apply
LOG: 26/11/2009 21:38:25.495 LOGGER (A)Rb2C00 config changes applied
LOG: 26/11/2009 21:38:28.692 WEBSERV (C)R01C00 (user:admin)save
LOG: 26/11/2009 21:38:47.230 ISDN (I)R01C05 incoming
call ref=[f10000de] srce=TEL:042997739 [0]
LOG: 26/11/2009 21:38:47.245 ROUTER (I)R0bC00 FINDROUTE profile:20(To_SIP)
plan:1
call ref=[f10000de] <-- ISDN [3,1]
dest=TEL:42993580
--> SIP [2,1]
dest=TEL:42993580
_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
