Nitin <nitin_mirchandani <at> hotmail.com> writes: > > Hello > > I have setup Sipx, able to register poycoms - everything works well. > I have encountered 2 problems - > > Problem 1 > Vegastream 50 Europa(ISDN), which will not dial. I have gone through the dial > rules a million times, still it wont. > > Here is what I am using - > Destination for ISDN-> SIP > IF:9901,TEL:100,TA:192.168.10.99 (192.168.10.99 is Sipx) > > and from SIP->ISDN > IF:1994,TEL:<1> > > I am able to recv call (only on 100, setting it as TA:sip_address doesnot > work), but I cannot dial anything. Sipx is not even looking at this gateway > (setup as unmanaged gateway) > > Problem 2 > Cisco 7975G > > The sip..conf.xml generated was wrong as mentioned by > http://track.sipfoundry.org/browse/XX-5358 > > Corrected it - But found that Ciscos cannot recv any call. Sipx would think > they are not registered(they are registering well - as in registration screen). > Ciscos can make calls. > > How to solve above problems? > Thank you > >
Hello Can anybody shed some light on why autoattendant considers all cisco hones as not registered? I can make calls from cisco to cisco, cisco to polycom. But po;ycom to cisco fails. Autoattendant to cisco fails(this extension is not avail) All cisco phones register well after I hack my server name in processnodename. Rgds _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
