What kind of firewall Paul?
Mike From: [email protected] [mailto:[email protected]] On Behalf Of Paul Gardiner Sent: Friday, November 27, 2009 4:55 PM To: [email protected] Subject: [sipx-users] Help with dial plans I just set up sipXecs for the first time, and it seems very cool. However, I can't seem to get outbound calling to work through and ITSP. I'm using vbuzzer.com, which isn't in the supported ITSP's list, but I have had it working with freeswitch for a while, and I didn't have to do anything special to get it going. For phones, I'm using an spa2102, and it's working fine, and it inbound calls through the ITSP (vbuzzer) are received at the correct extension, and the call is fine. When I try to dial out, I get dead aire, and eventually a busy signal. I have a gateway setup, and followed the instructions on setting up an ITSP step by step . Since vbuzzer wants a "1" sent for all north american calls (e.g. for 416-555-1212, I send it 14165551212), I setup a long distance dialing rule, with "9" as the PSTN prefix, and an optional "1" long distance prefix, and set my "vbuzzer" gateway as the gateway, which is routed through sipXbridge. My question is, when I make an outgoing call, what component of sipXecs handles the dial plan? I want to check the logs to see what's going on, but I'm not sure where to look. Here is the dial plan from authrules.xml: <hostMatch> <name>Long Distance</name> <description>xxx</description> <hostPattern>vbuzzer.com</hostPattern> <userMatch> <userPattern>1xxxxxxxxxx</userPattern> <permissionMatch> <permission>LongDistanceDialing</permission> </permissionMatch> </userMatch> </hostMatch> Thanks, Paul
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
