Scott Lawrence <scott.lawrence <at> nortel.com> writes: > If you'd like help with working out the issues, I suggest starting by > choosing just one problem, carefully describing your complete > configuration, and collecting traces of the network traffic for that one > problem and posting them here. > > See: > > http://sipx- wiki.calivia.com/index.php/Display_SIP_message_flow_using_Sipviewer#Getting_SIP_ Messages_to_display > >
I did see the sipviewer but we donot have any linux boxes around with X installed. Can you give any link for windows based sip viewer? Or maybe guide me how to use wireshark to collect sip packets. I will summarize problems a) Vegastream or GXW4104(as gateway) can only transfer calls to AA or Polycom phones. They cannot transfer calls to Cisco. b) I can call cisco-cisco or Polycom-cisco or Cisco-Polycom. I can call Cisco- AA. c) I cannot transfer call Cisco-Cisco. I can transfer Cisco-Polycom, but not polycom-Cisco. Before everybody gets confused, Cisco phones cannot recv calls from/to AA or gateway. They are regsitering well becasue I can call from other phones to Cisco (internal) And also, for Cisco - dialplan.xml is a requirement (on wiki it says otherwise) becasue if dialplan.xml is not present, the phone will dial only 1 digit. nitin _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
