Scott Lawrence wrote:
> On Thu, 2009-12-03 at 12:35 -0600, [email protected] wrote:
>
>> Sorry - Looks like I have one more that is giving me some trouble. I'm
>> not sure how to cause the case below. I tried disabling voicemail and
>> letting it ring until it just stooped. that did a 603 decline. Any
>> ideas on how to do this one? Most of the rest of the tests don't look
>> too difficult. Hopefully I will be able to get those done on my own.
>>
>>
>> [TC12] Ring No Answer Timer Expire
>> Test Objective:
>> The objective of this test case is to verify proper call termination
>> when the there is no answer at the target device.
>>
>>
>> Test Steps:
>> 1. Originate the call from the PSTN destined to the target customer
>> phone.
>>
>> 2. Do not answer the call. Let it ring until the ring no answer
>> timer expires.
>>
>> 3. Verify customer responds to CANCEL from Verizon proxy.
>>
>> 4. Customer captures SIP and RTP messaging.
>>
>
> You need to make the sipXecs system as a whole take longer to time out
> than the phone company does (do you know what that timeout is?).
>
> You could set up a hunt group that lets each phone ring for 60 seconds -
> keep adding phones until you get the phone company to give up.
>
>
I'll start a completely new topic if needed, but I'm guessing this is a
simple answer. I'm having to duplicate the functionality of a system
with internal 4 digit dialing. For the users, I've been assigning them a
for digit extension and then putting in their full 10 digit number as
their alias. I'm going to be receiving incoming calls sent to a ton of
different area codes, so I assumed I couldn't do a rule of some sort to
map the full xxx-xxxx-xxxx to just xxxx. With that in mind, how do I
assign a full 10 digit number to a hunt group? I only see an option for
an extension. I think I found a feature request asking this, but not too
much more on the topic.
http://track.sipfoundry.org/browse/XX-3211?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel
I'm guessing there is an easy way to assign the full number to the hunt
group or I'm doing something that is not 'best practices' in how I'm
mapping the full number to the users.
Thanks,
Matthew
_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
