That worked perfectly. It didn't turn out to be 5 minutes after all. I wasn't keeping track, but it was closer to 2 minutes.
Tony Graziano wrote: > For the hunt group, since there is no way to map the DID directly to > it, there are a couple of ways to do that. > > Mapping the DID numbers to users as aliases is the correct way. > > For your hunt groups (you want the DID to go right to the hunt group), > there are the following options: > > Create a "phantom user" (user with a line, no phone device), add the > DID as the alias. > > Using a schedule you can distribute the calls to a hunt group or AA. > > Without a schedule you can forward them to the hunt group all the time. > > > > On Thu, Dec 3, 2009 at 5:22 PM, [email protected] > <mailto:[email protected]> <[email protected] > <mailto:[email protected]>> wrote: > > Scott Lawrence wrote: > > On Thu, 2009-12-03 at 12:35 -0600, [email protected] > <mailto:[email protected]> wrote: > > > >> Sorry - Looks like I have one more that is giving me some > trouble. I'm > >> not sure how to cause the case below. I tried disabling > voicemail and > >> letting it ring until it just stooped. that did a 603 decline. Any > >> ideas on how to do this one? Most of the rest of the tests > don't look > >> too difficult. Hopefully I will be able to get those done on my > own. > >> > >> > >> [TC12] Ring No Answer Timer Expire > >> Test Objective: > >> The objective of this test case is to verify proper call > termination > >> when the there is no answer at the target device. > >> > >> > >> Test Steps: > >> 1. Originate the call from the PSTN destined to the target > customer > >> phone. > >> > >> 2. Do not answer the call. Let it ring until the ring no answer > >> timer expires. > >> > >> 3. Verify customer responds to CANCEL from Verizon proxy. > >> > >> 4. Customer captures SIP and RTP messaging. > >> > > > > You need to make the sipXecs system as a whole take longer to > time out > > than the phone company does (do you know what that timeout is?). > > > > You could set up a hunt group that lets each phone ring for 60 > seconds - > > keep adding phones until you get the phone company to give up. > > > > > I'll start a completely new topic if needed, but I'm guessing this > is a > simple answer. I'm having to duplicate the functionality of a system > with internal 4 digit dialing. For the users, I've been assigning > them a > for digit extension and then putting in their full 10 digit number as > their alias. I'm going to be receiving incoming calls sent to a ton of > different area codes, so I assumed I couldn't do a rule of some > sort to > map the full xxx-xxxx-xxxx to just xxxx. With that in mind, how do I > assign a full 10 digit number to a hunt group? I only see an > option for > an extension. I think I found a feature request asking this, but > not too > much more on the topic. > > http://track.sipfoundry.org/browse/XX-3211?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel > I'm guessing there is an easy way to assign the full number to the > hunt > group or I'm doing something that is not 'best practices' in how I'm > mapping the full number to the users. > Thanks, > Matthew > _______________________________________________ > sipx-users mailing list [email protected] > <mailto:[email protected]> > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > > > > > -- > ====================== > Tony Graziano, Manager > Telephone: 434.984.8430 > Fax: 434.984.8431 > > Email: [email protected] <mailto:[email protected]> > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > Fax: 434.984.8427 > > Helpdesk Contract Customers: > http://www.myitdepartment.net/gethelp/ > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
