I am deploying Soundpoint 450s and 550s. I'm using Sipx 4.0.4. The 450s worked out of the box. No major changes. Per the posts on here and the documentation I found, I had to downgrade the 550s to make them work at all. I added spip_ssip_vvx_3_1_3RevC_release_sig_split.zip to my Sipx server and all is well with the 550s. I double checked to see what firmware the 450s are running. Menu, Status, Platform, Application, Main shows version 3.1.0.0147. I assumed it would be a good idea to get these up to 3.1.3 as well before my roll out in 2 weeks. Now is where I get confused. Polycom shows spip_ssip_vvx_3_1_3RevC_release_sig_split.zip (same file as the one for the 550) as the file I need for the 450s. I can't check the same file in twice. I honestly don't quite understand how Sipx knew the first file was for the 550. I didn't know if it read it somewhere within the firmware file. Do I have to tell it somehow it is for the 450 too? Am I missing something obvious and simple here?
Thanks a ton! -Matthew _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
