Hi all I have a test config set up on sipxecs with just two handsets before we go for a much largerinstallation. But I've hit a problem getting the basic setup working.
I have sipxec 4.0.4-017289 on CentOS5, running with two Linksys IP Phones SPA942s (physical handsets). Each of the two handsets gets a dial tone and fetches its ID from the sipxec server. Each is able to dial eg 100 successfully. However the two handsets (with IDs 200 and 201) are not able to calleach other. When "200 -> Dial" is keyed, I get a busy signal(repeating tone) and "CallEnded" shown on the display. The sipxec config on the web admin page passes all config checks and indicates no problems. Please can you let me know what might be wrong here or where I can look for more details of the problem. I can post any logs or info as needed. Many thanks Dan
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
