I was able to resolve this problem. It came about because process of copying over the mrtg.conf file from web to file screwed up some of the line breaks.
Once I resolved that, I was able to perform all of the steps on that page without difficulty. Jeff On Jan 15, 2010, at 12:54 PM, Jeff Gilmore wrote: > I am trying to set up MRTG monitoring on my sipx 4.0.4 system which > was installed originally from the 4.0.2 ISO image. > > In following the directions on the Wiki, it all works well up to the > point where I incorporate the detailed version of the mrtg.conf file. > There seems to be an error in that file from the wiki, because it > gives back the error: > > ERROR: Line 12 (LoadMIBs:) in CFG file (/etc/mrtg/mrtg.cfg) does not > make sense > > when I run the indexmaker command. Looking at line 12, it appears to > be cut off in the middle of a filename: > > LoadMIBs: /usr/share/snmp/mibs/UCD-SNMP-MIB.txt,/usr/share/snmp/mibs/ > TCP-MIB.txt,/usr/share/snmp/mibs/HOST-RESOURCES-MIB.txt,/usr/st > > Can anyone point me to a correct version of this config file? > > Thanks! > > Jeff > _______________________________________________ > sipx-users mailing list [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
