> > You did not mention what version of sipx you are running. If it i s > 4.0.4 then I am very sure you have a configuration problem because > this is something that is surely working. > > The From header looks like you did not set your caller ID setting for > the gateway. > > Ranga
I'll paste the gateway settings and version details again below, buts its notable that the outbound CID is getting set correctly for the polycoms but not for the Patton FXS (until I fixed its internal From: address to not have an IP in it). Would it be better to paste a screen cap of the config screen? I though that was frowned on so I pulled it straight out of the config database as text. Thanks, -Eric >> >> Details and environment: >> >> My inside CID in the initial invite from the device (a patton FXS) is: >> >> From: "UL Cordless" <sip:[email protected]>;tag=6d8832c57a >> To: <sip:[email protected]> >> >> After going through the registrar and the the proxy it comes out of >> sipxbridge toward the ITSP as: >> >> From: "UL Cordless" <sip:[email protected]>;tag=2849050422005484683 >> To: <sip:[email protected];user=phone> >> >> Calls from my polycoms do not do this and instead send the configured >> callerid I put on the gateway page, the difference is they do not send their >> IP but rather the official 'domain' in the From: >> >> From: "Office 3" <sip:[email protected]>;tag=6F88CA59-A255167C >> >> this is transformed for the ITSP to: >> >> From: "E Varsanyi" <sip:[email protected]>;tag=8343318532040437072 >> >> The gatway to voip.ms is set up with 'Default Caller ID' blank and the >> 'Specify Caller ID' fields set up with the CID I want to send outbound as >> shown on the wiki: >> >> SIPXCONFIG=# select * from gateway where gateway_id = 1; >> -[ RECORD 1 ]------------+------------------------- >> gateway_id | 1 >> bean_id | gwSipTrunk >> name | voip.ms >> address | sip.ca2.voip.ms >> description | >> serial_number | >> value_storage_id | 5 >> model_id | itspVoipms >> device_version_id | >> prefix | >> default_caller_alias | >> anonymous | f >> ignore_user_info | f >> transform_user_extension | f >> add_prefix | >> keep_digits | 0 >> address_port | 0 >> address_transport | none >> sbc_device_id | 2 >> enable_caller_id | t >> caller_id | [email protected] >> display_name | E Varsanyi >> url_parameters | >> shared | t >> branch_id | >> enabled | t >> >> I'm running SVN 017896 on FC12. -Eric Varsanyi
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
