On Feb 16, 2010 8:32pm, Eric Varsanyi <[email protected]> wrote:
You did not mention what version of sipx you are running. If it is 4.0.4 then I am very sure you have a configuration problem because this is something that is surely working.
The From header looks like you did not set your caller ID setting for the gateway.
Ranga
I'll paste the gateway settings and version details again below, buts its notable that the outbound CID is getting set correctly for the polycoms but not for the Patton FXS (until I fixed its internal From: address to not have an IP in it).
Would it be better to paste a screen cap of the config screen? I though that was frowned on so I pulled it straight out of the config database as text.
Ah I see -- if it works fine with polycom but not with patton, your patton device is probably the culprit. The reason could be that the From header being set by Patton does not match the sipx domain name. I would compare the signaling that the polycom emits to that which the patton emits.
Ranga
Thanks, -Eric
Details and environment:
My inside CID in the initial invite from the device (a patton FXS) is:
From: "UL Cordless" sip:[email protected]>;tag=6d8832c57a To: sip:[email protected]>
After going through the registrar and the the proxy it comes out of sipxbridge toward the ITSP as:
From: "UL Cordless" sip:[email protected]>;tag=2849050422005484683 To: sip:[email protected];user=phone>
Calls from my polycoms do not do this and instead send the configured callerid I put on the gateway page, the difference is they do not send their IP but rather the official 'domain' in the From:
From: "Office 3" sip:[email protected]>;tag=6F88CA59-A255167C
this is transformed for the ITSP to:
From: "E Varsanyi" sip:[email protected]>;tag=8343318532040437072
The gatway to voip.ms is set up with 'Default Caller ID' blank and the 'Specify Caller ID' fields set up with the CID I want to send outbound as shown on the wiki:
SIPXCONFIG=# select * from gateway where gateway_id = 1; -[ RECORD 1 ]------------+------------------------- gateway_id | 1 bean_id | gwSipTrunk name | voip.ms address | sip.ca2.voip.ms description | serial_number | value_storage_id | 5 model_id | itspVoipms device_version_id | prefix | default_caller_alias | anonymous | f ignore_user_info | f transform_user_extension | f add_prefix | keep_digits | 0 address_port | 0 address_transport | none sbc_device_id | 2 enable_caller_id | t caller_id | [email protected] display_name | E Varsanyi url_parameters | shared | t branch_id | enabled | t
I'm running SVN 017896 on FC12.
-Eric Varsanyi
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
