Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Organization: SipXecs Forum In-Reply-To: <[email protected]> X-FUDforum: 08063afcdd00a6e76393c5b9527381e8 <44268> Message-ID: <[email protected]>
For eventlist BLF I tried both ~~rl~C~xxx and ~~rl~F~xxx. I could get the light to light green, but nothing else. For normal (peer-to-peer) BLF, I just set the multipurse key on the phone to BLF, the name to something like "User 202" and the User ID to "202". When I did this the button tracked the state of extension 202, I could use the button to pickup a ringing call on 202 if the button was flashing red, I could use the button as a speed dial if the button was green, or solid red. I did notice one case where the button got confused. If I called 202 and then on ext 202 I pressed "Reject" while the station was ringing, the button would get stuck in the ringing state. This does not seem to happen with the same configuration when using the phones under Asterisk so I don't know if the problem is the phone or sipx. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
