I crack myself up sometimes. Seriously, how did you configure the siptrunk? Directly on the Cisco or in sipx?
On Fri, Apr 30, 2010 at 1:51 AM, Tony Graziano <[email protected] > wrote: > Well, how about providing some information? > > What the heck is a C1760V gateway? Who makes it? The FXS or SIP UA's don't > dial the gateway. They should DIAL the proxy. The proxy should then send the > call out to the gateway. > > WHO the provider is DOES matter. > > Stop being mysterious and maybe you can obtain some real help. > > Here's how it might/should work... > > Your GATEWAY is just that, a gateway. If it is registering FXS lines it > supposedly should register them to SIPX. Calls from the PSTN should come in > on FXO ports, then be directed to SIPX. Calls out the PSTN should orginate > at your UA (soft/hard phone) and then be directed to SIPX proxy, where call > permissions are checked and passed to the gateway. > > There are several ways a SIPTRUNK can be configured. > > 1. ITSP calls (SIPTRUNK) are configured on SIPX and set to use the gateway > as an unmanaged SBC Route. In the SIP TRUNK templates, there is a list of > working providers. > 2. External gateway can be configured and sipx uses the device as an > unmanaged gateway. > 3. (The normal way) SIPX is setup with the trunk configuration and an > internal SBC and using a properly configured firewall manages the connection > AND SETTINGS to the ITSP. > > It sounds like you have configured your gateway, can't even google it by > the model you've listed here, is sending these credentials passed to it. > This usually means you need to configure your gateway to send the > subscriber/account number. While you can do this in sipx IF someone knew > what provider you were using and you have a properly configured firewall, I > don't get that sense here. > > Since it's all being done in you gateway, as I understand, and maybe noone > has ever heard of the device except you, it makes me ask if you have called > factory support or looked at the manual to understand how to get the desired > results? It sounds like the gateway is the issue here unless you can provide > better information. > > > On Thu, Apr 29, 2010 at 11:29 PM, drl <[email protected]> wrote: > >> >> Content-Type: text/plain; >> charset="utf-8" >> Content-Transfer-Encoding: 8bit >> Organization: SipXecs Forum >> In-Reply-To: <[email protected]> >> X-FUDforum: 08063afcdd00a6e76393c5b9527381e8 <45850> >> Message-ID: <[email protected]> >> >> >> >> To clarify there still is a problem with the gateways >> station ID being sent to the provider. The "from" must >> match the account ID or the call is not process and the >> response is 603 declined. >> _______________________________________________ >> sipx-users mailing list [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users >> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >> sipXecs IP PBX -- http://www.sipfoundry.org/ >> >
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
