Silly me! I had put port 5080 in my DSL router's ACL but not created the corresponding NAT rule(s). Will assess over time which rules are matched and really needed. :)
DID works now. Now for the out bound calls... On Sat, 2010-05-01 at 15:05 -0400, Picher, Michael wrote: > Looks good... > > > -----Original Message----- > > From: [email protected] [mailto:sipx-users- > > [email protected]] On Behalf Of Djerk Geurts > > Sent: Saturday, May 01, 2010 1:06 PM > > To: [email protected] > > Subject: Re: [sipx-users] Call routing for DID from ITSP > > > > > Calls need to route in to port 5080. > > > > sipgate.co.uk states the following: > > > _______________________________________________________________________ > > _ > > 1. Device:sipXecs/4.2.0 sipXecs/sipxbridge (Linux)IP: > > sip:[email protected]:5080 > > > > So it should direct stuff @ port 5080 right? > > > > FWIW, sipgate seems me as online and sipxecs says authenticated. > > > > Regards, > > Djerk > > > > _______________________________________________ > > sipx-users mailing list [email protected] > > List Archive: http://list.sipfoundry.org/archive/sipx-users > > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > > sipXecs IP PBX -- http://www.sipfoundry.org/ > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
