Not so fast quick draw. Can't expect to use the SIP ALG with sipxbridge. Its recommended to disable that.
12000 is for bria provisioning service. Symmetric port nat is a must. ============================ Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ ----- Original Message ----- From: Djerk Geurts <[email protected]> To: Tony Graziano <[email protected]> Cc: [email protected] <[email protected]> Sent: Sat May 01 17:58:54 2010 Subject: Re: [sipx-users] Call routing for DID from ITSP On Sat, 2010-05-01 at 17:49 -0400, Tony Graziano wrote: > 80 (tcp), 5060 (tcp and udp), 5080 (udp), 8443 (tcp), 12000 (tcp) and > 30000-31000 (udp). Your NAT type need to be symmetric port nat or you > will > have audio issues, etc. Tx Tony. I manage the machine internally so no external mgt needed. What is 12000 tcp for? My DSl router is a Cisco 877 so RTP is not needed in my NAT rules due to SIP packet inspection. Asterisk only needed 5060 so 5080 is new, plus the IM ports though I'll probably never get round to using those... > ============================ > Tony Graziano, Manager > Telephone: 434.984.8430 > Fax: 434.984.8431 > > Email: [email protected] > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > Fax: 434.984.8427 > > Helpdesk Contract Customers: > http://www.myitdepartment.net/gethelp/ > > ----- Original Message ----- > From: [email protected] > <[email protected]> > To: [email protected] <[email protected]> > Sent: Sat May 01 17:33:29 2010 > Subject: Re: [sipx-users] Call routing for DID from ITSP > > Silly me! > > I had put port 5080 in my DSL router's ACL but not created the > corresponding NAT rule(s). Will assess over time which rules are matched > and really needed. :) > > DID works now. Now for the out bound calls... > > On Sat, 2010-05-01 at 15:05 -0400, Picher, Michael wrote: > > Looks good... > > > > > -----Original Message----- > > > From: [email protected] [mailto:sipx-users- > > > [email protected]] On Behalf Of Djerk Geurts > > > Sent: Saturday, May 01, 2010 1:06 PM > > > To: [email protected] > > > Subject: Re: [sipx-users] Call routing for DID from ITSP > > > > > > > Calls need to route in to port 5080. > > > > > > sipgate.co.uk states the following: > > > > > _______________________________________________________________________ > > > _ > > > 1. Device:sipXecs/4.2.0 sipXecs/sipxbridge (Linux)IP: > > > sip:[email protected]:5080 > > > > > > So it should direct stuff @ port 5080 right? > > > > > > FWIW, sipgate seems me as online and sipxecs says authenticated. > > > > > > Regards, > > > Djerk > > > > > > _______________________________________________ > > > sipx-users mailing list [email protected] > > > List Archive: http://list.sipfoundry.org/archive/sipx-users > > > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > > > sipXecs IP PBX -- http://www.sipfoundry.org/ > > > > _______________________________________________ > sipx-users mailing list [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
