Do you mean in terms of potential damage trying or it just won't work at worse?
On Wed, 5 May 2010 05:24:07 -0400, Picher, Michael wrote: > The HD Polycom phones are pretty specific as to which headsets they > support. The non-hd are more accepting. > > Mike > > From: [email protected] [mailto:sipx-users- > [email protected]] On Behalf Of Josh Patten > Sent: Tuesday, May 04, 2010 10:53 PM > To: [email protected] > Subject: Re: [sipx-users] Long shot: Lucent headset with polycom? > > > If you can get your hands on one it should work. Just plug the one that > goes to the phone in the headset jack of the amp then just press the > headset button on the phone when you want to use it (assuming you find the > power supply for it). > > I had an old plantronics amp very similar to that, except it used AA > batteries. > > On 05/04/2010 09:35 PM, [email protected] wrote: Yup, no audio and can't > seem to find a power supply for the amp. On Mon, 03 May 2010 22:22:08 - > 0500, Josh Patten wrote: > At the worst you'd get no sound. At the best, > it would work. You could always purchase a Jabra universal adapter > (assuming the headsets have quick disconnects): > Seem to. The headset has normal wire to what I could call a quick > disconnect, a sort of flat connector which then has a phone cord to a small > modular jack. That jack is what would connect into the phone's headset jack > or into the amp unit I have with these. I'll give them a try. Just wanted > to make sure nothing would blow up. Mike > http://www.jabra.com/NA- > US/headsetsolutions/Pages/JabraAudioEnhancers.aspx (GN-1200) On 05/03/2010 > 10:18 PM, [email protected] wrote: > On Mon, 03 May 2010 22:06:39 - > 0500, Josh Patten wrote: > Is there no way you can try them out? > Looks pretty standard, in fact you could try ditching the little amp > altogether and plug straight in the headset port. Just tinker with one if > you can. >>> Sure can, just seem to recall someone saying the polycom ports were >>> pretty specific and didn't want to blow up a phone for no good reason >>> :). Mike _______________________________________________ sipx-users >>> mailing list [email protected] list Archive: >>> http://list.sipfoundry.org/archive/sipx-users Unsubscribe: >>> http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- >>> http://www.sipfoundry.org/ >> _______________________________________________ sipx-users mailing list >> [email protected] list Archive: >> http://list.sipfoundry.org/archive/sipx-users Unsubscribe: >> http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- >> http://www.sipfoundry.org/ > _______________________________________________sipx-users mailing list > [email protected] Archive: > http://list.sipfoundry.org/archive/sipx-usersUnsubscribe: > http://list.sipfoundry.org/mailman/listinfo/sipx-userssipXecs IP PBX -- > http://www.sipfoundry.org/
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
