Hi all, I just installed a Mediant 1000 gateway, uploaded the generated config for it (pretty standard), and that works like a charm. But: when a call comes in from the PSTN to the gateway with a CLI which is the same as a user defined in sipXecs, then sipXecs will ask for 407 proxy authentication, which the Mediant obviously cannot provide.
I know having users with the same ID as possible incoming CLI's does not make much sense in a real deployment, but this is a test-platform in which it is that way. 2 questions: 1) Does this sounds like a bug, or is sipXecs designed this way (matching from:/contact: address before matching on a configured gateway) 2) As a workaround, I can define a prefix in the Mediant web interface to add to the incoming CLI's, which obviously works (in the web interface: Protocol Configuration => Manipulation Tables => Source Number Tel->IP). This is kind of a solution, the question remains if these setting can be done from the sipXecs configuration, otherwise I have to manually configure the Mediant. Kind regards, Eelco Brölman ----- Eelco Brölman | Sr. Product Specialist | Telecats bv _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
