I have not found a way to modify CLI in the Audiocodes platform. This would be a nice thing to know if someone has figured this out.
Josh Patten Assistant Network Administrator Brazos County IT Dept. (979) 361-4676 On 5/6/2010 12:24 PM, Eelco Brölman wrote: > Hi all, > > I just installed a Mediant 1000 gateway, uploaded the generated config for it > (pretty standard), and that works like a charm. But: when a call comes in > from the PSTN to the gateway with a CLI which is the same as a user defined > in sipXecs, then sipXecs will ask for 407 proxy authentication, which the > Mediant obviously cannot provide. > > I know having users with the same ID as possible incoming CLI's does not make > much sense in a real deployment, but this is a test-platform in which it is > that way. > > 2 questions: > > 1) Does this sounds like a bug, or is sipXecs designed this way (matching > from:/contact: address before matching on a configured gateway) > > 2) As a workaround, I can define a prefix in the Mediant web interface to add > to the incoming CLI's, which obviously works (in the web interface: Protocol > Configuration => Manipulation Tables => Source Number Tel->IP). This is > kind of a solution, the question remains if these setting can be done from > the sipXecs configuration, otherwise I have to manually configure the Mediant. > > Kind regards, > > Eelco Brölman > > ----- > Eelco Brölman | Sr. Product Specialist | Telecats bv > > _______________________________________________ > sipx-users mailing list [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
