On Fri, 2010-05-07 at 12:35 +0200, Rene Pankratz wrote: > Hello, > I have a PSTN GW and another unmanaged GW connected to the SipX > (4.0.4). > > Incoming calls from PSTN that match an extension (e.g exact match on > ext "298") shall be routed to the other unmanaged GW. > But unfortunately the SipX wants the PSTN GW to be authenticated and > sends a 407. > > No permission is configured to be needed in the dialing rule for the > second unmanaged GW. Of course incoming calls ID also do not match an > existing user on SipX. > > When I disble the dialing Rule I get a 404 not found. So the dialing > rule is the one that matches. > > I have another dialing rule in my diaplan that needs permissions and > also uses the unmanaged GW. Is it not possible to route calls to > specific extensions without a permission through the GW when another > dialing rule (with permissions) also uses the GW?
I don't remember whether or not 4.0.4 has the site-to-site dial plan type - if not, upgrade to 4.2.0 (actually, you should just upgrade anyway). Try setting up the plan that does not need a permission as a site-to-site plan. (there is a problem with the evaluation of permissions on dial plans that the site-to-site plan works around) _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
