Well, I went back over all the settings and found the problem. Thanks
for your suggestions, Tony.
On Sat 12.Jun.10 13:42, Tony Graziano wrote:
>You have 2 gateways with different providers and names.
>
>Try this. Make a dial plan entry for a specific phone number (ex: your cell
>phone) and send it to your new gateway.
>
>As you have not provided a lot of useful information, I'd suggest to disable
>the old gateway !y altering the sip trunk (I.e. If it registers put in the
>wrong password so it can't register and use it).
>
>Your dialplan likely has an entry for the old gateway. It matches the first
>permission and sends the call, so its placement matters. If you have no
>dialplans assigned to the old gateway, you have a bigger problem (which I've
>never seen).
>============================
>Tony Graziano, Manager
>Telephone: 434.984.8430
>Fax: 434.984.8431
>
>Email: [email protected]
>
>LAN/Telephony/Security and Control Systems Helpdesk:
>Telephone: 434.984.8426
>Fax: 434.984.8427
>
>Helpdesk Contract Customers:
>http://www.myitdepartment.net/gethelp/
>
>----- Original Message -----
>From: Dan McDaniel <[email protected]>
>To: Tony Graziano <[email protected]>
>Sent: Sat Jun 12 13:34:36 2010
>Subject: Re: [sipx-users] changing gateway in dial plan
>
>On Sat 12.Jun.10 13:07, Tony Graziano wrote:
>>Go to your gateway that should not be processing the call and remove the
>>dial plans from it, for starters.
>Double checked. The old gateway has no dial plans.
>>
>>Make sure the gateway that IS suppsoed to process calls has the appropriate
>>dial plans assigned.
>Check.
>>
>>You will need to restart whatever services it is prompting you to restart
>>(proxy, trunking, etc.).
>>
>Restarted them again just to be sure. Outbound calls still use the old
>gateway.
>
>>
>>============================
>>Tony Graziano, Manager
>>Telephone: 434.984.8430
>>Fax: 434.984.8431
>>
>>Email: [email protected]
>>
>>LAN/Telephony/Security and Control Systems Helpdesk:
>>Telephone: 434.984.8426
>>Fax: 434.984.8427
>>
>>Helpdesk Contract Customers:
>>http://www.myitdepartment.net/gethelp/
>>
>>----- Original Message -----
>>From: [email protected]
>><[email protected]>
>>To: [email protected] <[email protected]>
>>Sent: Sat Jun 12 12:30:10 2010
>>Subject: [sipx-users] changing gateway in dial plan
>>
>>
>>I wanted to change the ITSP I'm using, so I changed the gateway setting
>>in the dial plan. However, the calls still go out through the old
>>gateway. I've restarted the services, re-sent the profiles and even
>>rebooted, but the change does not take effect. What am I missing?
>>
>>Using 4.2.0.
>>
>>--
>>Dan McDaniel
>>[email protected]
>>Key fingerprint = CAEC B8D9 3701 86CF D3B2 1E99 D8BB F217 455C AD36
>>_______________________________________________
>>sipx-users mailing list [email protected]
>>List Archive: http://list.sipfoundry.org/archive/sipx-users
>>Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
>>sipXecs IP PBX -- http://www.sipfoundry.org/
>>
>
>
>
>--
>Dan McDaniel
>[email protected]
>Key fingerprint = CAEC B8D9 3701 86CF D3B2 1E99 D8BB F217 455C AD36
>
--
Dan McDaniel
[email protected]
Key fingerprint = CAEC B8D9 3701 86CF D3B2 1E99 D8BB F217 455C AD36
_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
