On Sat, Jun 19, 2010 at 8:58 PM, Tim Byng <[email protected]> wrote: > On Sat, Jun 19, 2010 at 7:32 PM, Tony > Graziano <[email protected]> wrote: >> >> Well, I would never connect something like that. > > I used the instructions found on "Configuring remote workers cheatsheet" > found at > "http://sipx-wiki.calivia.com/index.php/Configuring_remote_workers_cheatsheet: > > * Set proxy to the SIP domain of your sipXecs > * Configure the outbound proxy to be the public IP address of the > firewall/NAT fronting sipXecs > All of this refers to the media relay within sipx for "its" own use. It has nothingt to do with your phone settings.
If the nokia does not handle SRV, then use fqdn, but that fqdn has to be real. You have to deal with that first. > >> >> Rather I'd set the dns on >> my public facing server and add the domain alias to my sipx system at a >> minimum. > > I'll look into this further once I've got it working with the public IP. > Thanks for the suggestion. > >> >> Does nokia publish a manual for the phone? > > Yes. I've read through them (there are two). It sounds like the proxy and > outbound proxy settings on the PAP2T map to the registrar and proxy settings > on the E71, respectively. > I'm still fighting to get this to work. I'd really like to get this working > by tomorrow at noon. I'm trying to set it up for a co-worker who's leaving > for Europe tomorrow. We ordered the phone a while back but it got delayed by > over a week, so now I'm in a rush to get it set up. > >> >> ============================ >> Tony Graziano, Manager >> Telephone: 434.984.8430 >> Fax: 434.984.8431 >> >> Email: [email protected] >> >> LAN/Telephony/Security and Control Systems Helpdesk: >> Telephone: 434.984.8426 >> Fax: 434.984.8427 >> >> Helpdesk Contract Customers: >> http://www.myitdepartment.net/gethelp/ >> >> ----- Original Message ----- >> From: Tim Byng <[email protected]> >> To: Tony Graziano <[email protected]> >> Cc: sipX Users Mailing List <[email protected]> >> Sent: Sat Jun 19 19:11:49 2010 >> Subject: Re: [sipx-users] Nokia E71 Remote Worker Configuration >> >> On Sat, Jun 19, 2010 at 3:06 PM, Tony Graziano >> <[email protected] >> > wrote: >> >> > Your message makes me wonder how you expect it to work at all. >> > >> > If the phone is REMOTE and the is NAT and the open Internet between >> > it, you should start with a regular softphone. If your domain is >> > really .local, it will not work. The SIPDOMAIN must be a publicly >> > routable domain name (and tld). >> > >> >> Sorry, that was a typo. The internal FQDN of the server is >> sipx.mydomain.local. When I successfully connect to it from the outside >> with >> other devices (such as the PAP2T), I set the proxy to mydomain.local and >> the >> outbound proxy to the external IP address. >> >> Some of the property names on the Nokia E71 are a little different and I'm >> not sure what to set some of them to. For example, I don't know which >> property is similar to the outbound proxy. >> >> The other problem is my knowledge of SIP and general networking isn't as >> strong as I'd like (I'm a software developer, not a network guy). >> > -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.984.8431 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ Why do mathematicians always confuse Halloween and Christmas? Because 31 Oct = 25 Dec. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
