> -----Original Message----- > From: Staffan Kerker [mailto:[email protected]] > Sent: Wednesday, June 23, 2010 7:24 AM > To: Saint, David (David) > Cc: sipx-users > Subject: Re: [sipx-users] Sipxconfig on seperate host? > > > On 18 jun 2010, at 15.07, Saint, David (David) wrote: > > > I would have thought this could be configured as an HA cluster. > > Once the two secondary servers (with "SIP Router" role > selected) were > > added in configuration and registered then the "Primary SIP Router" > > role on the first server could be de-selected. > > > I tried this one out. Now, "Primary SIP Router" cannot be > deactivated on the primary server in the GUI. However, by > removing the appropriate SRV records in DNS I can make sure > that no SIP signaling is sent to the primary server, only > load balancing between the two "Redundant SIP Routers". > > Now my question is, am I missing something here that will > break stuff? > > host1 (configuration only) > -- > Configuration/Management > Primary SIP Router (shutdown) > > host2 (the "new" primary) > -- > Voicemail > Conference > Redundant SIP Router > SIP Trunking > > host3 (redundant call router) > -- > Redundant SIP Router > > /Staffan > >
That sounds like it should work OK, host 1 will still be the primary SIP router in the GUI but it won't receive any registrations. Would be nice if the GUI supported removing the first SIP router once the second one was added, you could raise an improvement jira on that. Dave. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
