Thanks for the suggestion Michael, but no change.
Sven ________________________________ From: Michael Picher [mailto:[email protected]] Sent: 29 July 2010 18:30 To: Sven Evensen Cc: [email protected] Subject: Re: [sipx-users] sipxproxy adds 1.5 second to outgoing INVITE what if you move that particular dial plan entry up in the dial plan? On Thu, Jul 29, 2010 at 12:28 PM, Sven Evensen <[email protected]> wrote: I have noticed that an outgoing INVITE is "stuck" in sipxProxy for 1.5 seconds before it is sent out. This is if the destination is soft phone or a SIP trunk not using sipXBridge. When sipXBridge is used, this delay is not seen. See attached gif for screenshot from wireshark. I have also attached the relevant lines from the sipxproxy.log. The delay can be seen in line 505. Call setup times is VERY important to us, so this 1.5 seconds is something we must avoid. Regards, Sven Sven Evensen, Technical Support Consultant OnRelay Elizabeth House | 39 York Road, London SE1 7NQ, UK | +44 (0) 207 902 8123 | [email protected] | <http://www.onrelay.com/> www.onrelay.com <http://www.onrelay.com/> This electronic message transmission contains information from OnRelay, Ltd., that may be confidential or privileged. The information is intended solely for the recipient and use by any other party is not authorised. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information or any attachment, is prohibited. If you have received this electronic transmission in error, please notify us immediately by electronic mail ([email protected]) and delete this message, along with any attachments, from your computer. Registered in England No 04006093 | Registered Office 1st Floor, 236 Gray's Inn Road, London WC1X 8HL _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/ -- There are 10 kinds of people in this world, those who understand binary and those who don't. [email protected] blog: http://www.sipxecs.info call: sip:[email protected] <mailto:sip%[email protected]>
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
