See if the gateway has default asserted identity checked. If so, uncheck it. ============================ Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431
Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ ----- Original Message ----- From: Ali Nebi <[email protected]> To: Tony Graziano <[email protected]> Cc: [email protected] <[email protected]> Sent: Fri Aug 13 06:40:34 2010 Subject: Re: [sipx-users] Caller ID set by users is not showed in other side (sipxecs 4.2.1). Tony, i was checking a trace more deeply and i see this. When i do a call from user 400, with set caller id 0035966688787 for 400, to 003595454545, i see following: 1. From sipXproxy to sipxbridge the from header looks this way: From: "Ali Nebi" <sip:[email protected]>;tag=zshot and this is ok i think. 2. From sipxbridge to ITSP the from header looks this way: From: "Ali Nebi" <sip:[email protected]>;tag=832786852632511282 This is wrong here and this is why my ITSP does not send caller id to the other side. The question is how to put instead of my_username_in_itsp to be my caller id number? But i suppose that if i do so somehow, then ITSP will not accept my calls, because it will not know who i am. So how to proceed? Thanks in advanced! On Thu, 2010-08-12 at 07:20 -0400, Tony Graziano wrote: > When it suits your schedule, removing and re-creating the gateway might be > prudent. It will interrupt remote registrations and call via trunks so > timing would be important. > ============================ > Tony Graziano, Manager > Telephone: 434.984.8430 > Fax: 434.984.8431 > > Email: [email protected] > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > Fax: 434.984.8427 > > Helpdesk Contract Customers: > http://www.myitdepartment.net/gethelp/ > > ----- Original Message ----- > From: Ali Nebi <[email protected]> > To: Tony Graziano <[email protected]> > Cc: [email protected] <[email protected]> > Sent: Thu Aug 12 06:50:02 2010 > Subject: Re: [sipx-users] Caller ID set by users is not showed in other > side > (sipxecs 4.2.1). > > I just tested with the other trunk (telsome) and caller id is shown and > is ok. It looks that this is an issue only with voicetrading. > > On Thu, 2010-08-12 at 06:08 -0400, Tony Graziano wrote: > > Does it work for any user at all (callerid)? > > > > I am running 4.2.1 and don't have that problem. I tried with both > > counterpath and polycom phones. I tried with both voip.ms and > > bandwidth.com. > > > > Are you using a repo at download.sipfoundry.org? > > ============================ > > Tony Graziano, Manager > > Telephone: 434.984.8430 > > Fax: 434.984.8431 > > > > Email: [email protected] > > > > LAN/Telephony/Security and Control Systems Helpdesk: > > Telephone: 434.984.8426 > > Fax: 434.984.8427 > > > > Helpdesk Contract Customers: > > http://www.myitdepartment.net/gethelp/ > > > > ----- Original Message ----- > > From: [email protected] > > <[email protected]> > > To: [email protected] <[email protected]> > > Sent: Thu Aug 12 03:41:31 2010 > > Subject: [sipx-users] Caller ID set by users is not showed in other > > side(sipxecs4.2.1). > > > > Hi, > > > > on 4.2.1 we have several users that have set specific Caller IDs for > > their users. The Caller IDs are NOT blocked. > > > > In trunk settings we have not set Default Caller IDs and in advanced > > settings of trunks we have unchecked this option: "User part of INVITE > > SIP URI is a phone number". We have unchecked this, because our ITSP > > does not like this and expect to see username in URI. > > > > The situation is this. > > > > I do external call and phone is ringing on the other side. But phone > > does not show the number (Caller ID), but it shows "Private Number". For > > the phone number is hidden and it shows "Private Number". > > > > In traces of call i see this header set: > > > > P-Asserted-Identity: "Ali" <sip:[email protected]> > > > > On version 4. > > It looks that ITSP does not take the data from this header and the > > number is not showed when we do a call. > > > > So how can i solve this problem? > > > > Let me know if you need a trace and i will attach it. > > > > Thanks in advanced > > > > _______________________________________________ > > sipx-users mailing list > > [email protected] > > List Archive: http://list.sipfoundry.org/archive/sipx-users/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
