Also, if you setup a trunk (gateway) to callcentric and do not use a template you WILL have a "Route by To:" header option at the bottom to get around the "all calls route to an account number in the INVITE...
I think I stated that in an earlier thread to you though... ============================ Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ ----- Original Message ----- From: Tony Graziano <[email protected]> To: [email protected] <[email protected]> Sent: Sun Oct 10 15:28:17 2010 Subject: Re: [sipx-users] Multiple SIP Trunking First, callcentric is a BAD example for too many reasons. ANY commercial oriented ITSP can allow you multiple DID numbers on a single trunking account. They will also let you specify your outbound callerid at the user level. For example: the "templated" list of ITSP's in sipx leads you in a certain direction of ITSP's who work in this way. What your perceptions are right now are improperly formed by an experience with another ITSP who does things differently. I've said this before, now again, ALL ITSP'S ARE NOT EQUAL. Some don't send the DID in the INVITE. Some don't allow multiple DID's on an account (some even require a registration per DID!). Some don't let you send your own callerid. Some don't let you specify your registration port. A quick easy example that works is voip.ms. A 20 dollar account has you registering and doing all that most people need. I understand some people use different carriers due to specific needs, but let's not cloud the issue by assuming sipxbridge is somehow the problem... ============================ Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ ----- Original Message ----- From: [email protected] <[email protected]> To: [email protected] <[email protected]> Sent: Sun Oct 10 15:15:38 2010 Subject: [sipx-users] Multiple SIP Trunking I was under the impression that multple phone number sip trunking is allowed with sipx. If I am not mistaken, I saw someplace that multiple phone numbres could receive incoming phone calls. Whereas, outgoing, you could have only one. If this is so, sipx doesn't allow me to add another gateway for sipxbridge-1. Could somebody clarify this. Thanks in advance _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
