Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Organization: SipXecs Forum In-Reply-To: <[email protected]> X-FUDforum: 08063afcdd00a6e76393c5b9527381e8 <53229> Message-ID: <[email protected]>
CONSIDER SUBSCRIBING TO THE SIPX-USERS LIST FOR A BROADER AUDIENCE... The log really does not show much. It's clear the register attempts were generated by sipx. It might be better to ask the itsp. Delete the gateway you have and set it back up again. Leave sipxbridge at port 5080, do not change it to 5070. change your firewall rule back to 5080. The ITSP wants you to register "to" port 5060. They want you to send calls on port 5070. You will need to ask them IF they will be able to send you call signalling on port 5080 if you register to them FROM port 5080. If they say they can only send calls to your on port 5060, that will require an external SBC or waiting for a software enhancement to be made to sip, which is underway but may be several weeks away for most people... (if you register FROM port 5080 to the ITSP on port 5060, they "should" be able to send you calls on port 5080. You would just change the gateway configuration>advanced> port from auto to 5070 for sending calls to them on 5070. if this doesnt allow you to register or get/send calls, ask them to tell you what they see and dont like. -- ===================== Tony Graziano, Manager Telephone: 434.984.8430 sip: mailto:[email protected][/email] Fax: 434.984.8431 Email: mailto:[email protected][/email] _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
