That netgear is an abomination. You'll find buffalo and some others have some models you can put an opensource os on and are fully configurable. ============================ Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431
Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ ----- Original Message ----- From: [email protected] <[email protected]> To: sipx-users <[email protected]> Sent: Wed Oct 13 13:23:50 2010 Subject: Re: [sipx-users] sipx with netgear WNR3500 On Wed, 13 Oct 2010 06:12:45 -0400, Tony Graziano wrote: > if he is using a softhphone make sure it is set for using local address, > ice and stun truned off. make sure your sip alg and spi is off. In this case, a simple PAP2 ATA would fulfill the requirement. Putting it directly on his provider DLS model works fine but as soon as we connect it to his netgear, audio and two way calling works but incoming calls don't ring, they just go direct to VM after the two rings we have his account set to. Turning spi off on the netgear and even adding port forwards didn't change a thing. At this point, he's getting a two port ATA/Router in between his provider and netgear so that we're done with it. These things are the only ones I know about right now, the Linksys RTP300-NA and the Linksys RT31P2-NA. I need to find a low cost, reliable ATA/Router or even better, ATA/Passthrough device with DHCP or something. Thanks for the input, confirms we should not spend too much time on these problems. Mike _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
