patton stuff is remarkably configurable... i swear. and i use them in great qty... audiocodes are boat anchors around here...
On Wed, Oct 13, 2010 at 2:17 PM, Philippe Laurent <[email protected]> wrote: > Looking for opinions, and I know that folks here use a variety of makes > including the AudioCodes and Patton devices. > > Requirements: 1 T1 interface. > Support: Required, 24/7 (a small shop with few people) > Redundancy: I have the budget, but do I really need it? > Ease of setup would be nice, but reliability is much higher on the list. > > I have experience in setting up an AudioCodes MP114, and finally understand > the device (well enough, anyway). > > The gateways I have looked at are the AudioCodes M1000, and the Patton > SmartNode SN4960, and will support a single site with simple DID routing > inbound. The back end will be replacing an Asterisk/Digium card setup with a > sipX and external gateway, supporting around 125 endpoints, mostly Polycom > 650. > > There will be some internal analog FXS gateways, but will issue separate > gateways for those due to geographic distribution througout the facility. > > I've read through the list and found a few threads of the same, but about a > year old... wonder if anyone has some added opinions. Speaking with > Marketing folks has been less than ideal in helping me come to a decision. > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.326.5325 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Contract Customers: http://support.myitdepartment.net
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
