I use Patton for FXO gateways, Audiocodes for everything else. I've not had one lick of trouble out of my Mediant 1000. Audiocodes FXO gateways leave something to be desired though...
From: [email protected] [mailto:[email protected]] On Behalf Of Todd Hodgen Sent: Wednesday, October 13, 2010 1:22 PM To: 'Discussion list for users of sipXecs software' Subject: Re: [sipx-users] Digital Gateway opinions I followed Mike, Tony and Jim's input and used a Patton SmartNode with one customer - it's been up for about 6 months - no issues yet once it was setup correctly. Seems to be very stable and reliable thus far. From: [email protected] [mailto:[email protected]] On Behalf Of Philippe Laurent Sent: Wednesday, October 13, 2010 11:18 AM To: sipx-users Subject: [sipx-users] Digital Gateway opinions Looking for opinions, and I know that folks here use a variety of makes including the AudioCodes and Patton devices. Requirements: 1 T1 interface. Support: Required, 24/7 (a small shop with few people) Redundancy: I have the budget, but do I really need it? Ease of setup would be nice, but reliability is much higher on the list. I have experience in setting up an AudioCodes MP114, and finally understand the device (well enough, anyway). The gateways I have looked at are the AudioCodes M1000, and the Patton SmartNode SN4960, and will support a single site with simple DID routing inbound. The back end will be replacing an Asterisk/Digium card setup with a sipX and external gateway, supporting around 125 endpoints, mostly Polycom 650. There will be some internal analog FXS gateways, but will issue separate gateways for those due to geographic distribution througout the facility. I've read through the list and found a few threads of the same, but about a year old... wonder if anyone has some added opinions. Speaking with Marketing folks has been less than ideal in helping me come to a decision.
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
