This also assumes the ITSP allows or is configured to allow G729. I suspect the ITSP is allowing it, otherwise the call should fail, but not all ITSP's give appropriate error codes (not allowed, etc.).
On Mon, Nov 1, 2010 at 8:06 AM, Sven Evensen <[email protected]>wrote: > Hi James, > > > > Check the SIP trunking config, advanced settings. > > The Permitted Codecs does not include G729 by default > > Either leave the field blank, or add G729. > > > > Sven > > > ------------------------------ > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *James Black > *Sent:* 01 November 2010 11:22 > > *To:* Discussion list for users of sipXecs software > *Subject:* Re: [sipx-users] G.729AB - Freeswitch > > > > Hi Arman, > > > > I have subsequently installed with the > http://files.freeswitch.org/g729/fsg729-153-installer > > > > The AA/Voicemail is now working for internal G729 Calls (over our vpn), > however when I get calls coming in from our ITSP, as soon as the call is > supposed to get answered, it is just cut. > > > > Any ideas? If someone answers the inbound call from the ITSP, it works > fine, it is only when going to voicemail etc that it is cut. > > > > *Kind regards* > > * * > > *James Black* > > > > *From:* Arman Güngör [mailto:[email protected]] > *Sent:* 29, October, 2010 1:13 PM > *To:* Discussion list for users of sipXecs software > *Subject:* Re: [sipx-users] G.729AB - Freeswitch > > > > Hi, > > What is the version of fsg729-xxx-installer? > > Arman > > On Fri, Oct 29, 2010 at 8:24 AM, James Black <[email protected]> > wrote: > > Hi All, > > > > I am trying to install a licensed g729ab codec from freeswitch.org onto > our sipXconfig (4.2.1-018971.dhubler 2010-08-21T04:59:18 build34) > > This is so that our incoming calls can terminate to voicemail / AA. In > South Africa all the ITSPs use g729. > > I have followed instructions here: > > http://wiki.sipfoundry.org/display/xecsuser/G729+License > > and here: > > http://files.freeswitch.org/g729/INSTALL.txt > > > > on trying to load the new g729 module, mod_com_g729 > > > > I get the following error: > > > > freeswi...@internal> load mod_com_g729 > > -ERR [module load file routine returned an error] > > > > 2010-10-29 07:48:07.031712 [CRIT] switch_loadable_module.c:882 Error > Loading module /usr/local/freeswitch/mod/mod_com_g729.so > > **Trying to load an out of date module, please rebuild the module.** > > > > Are there any solutions for this? > > > > Thank you for all the wonderful support in the past! > > > > Kind regards > > > > James > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.326.5325 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Contract Customers: http://support.myitdepartment.net
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
