I ran a test because I had never tried this before... Setup 2 polycom 650's (ext 200 & 201) with firmware 3.2.1b and a Counterpath bria 3.1.2.1 (ext 202) client.
sipXecs: 4.4 pre-beta [0.4.4-5b9dc0c 2010-11-23T05:32:07 build33] (that's for everyone's benefit that thinks 4.4 is in beta yet) Scenario 1 (working): Hunt Group: 300 - contains ext 200 & 201, rings both at the same time. Extension 200 dials extension 300, extension 201 rings (as expected). Counterpath bria (202) dials *78300 and picks up ringing phone and is talking to ext 200 (as expected). Henry, you might want to test some Polycom Soundpoints if you have them. Scenario 2 (working): Users 200 & 201 are in hunt group 300. User 200 dials user 201. Extension 202 (bria) dials *78300 and picks up ringing phone and is talking to ext 200 (as expected). Scenario 3 (not working, i've captured and sent to engineering): Users 200 & 201 are in hunt group 300. User 200 set to ring for 10 seconds and at the same time 201 is set to ring for 60 seconds. Ext 202 (bria) dials hunt group 300. User 200 misses the call and then dials *78300. User picks up the ringing phone and is connected to ext 202 but there is one way audio from Polycom (200) to Bria (202). Mike On Wed, Dec 1, 2010 at 11:12 AM, Henry Dogger <[email protected]> wrote: > I allready found the problem with doing an alias pickup. > > Directed call pickup with *78 works just fine. > > But when I try to pick up the same ringing phone with the same phone as I > did directed call pickup with, in a hunt group, it doesn’t work. > > I configured a hunt group with 3 phones let’s say: 201 202 and 203 > huntgroup is 300. > > *78201 works fine with phone 203. But when 201 rings, *78300 doesn’t work… > > The lines are only configured on one phone. > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Tony Graziano > *Sent:* woensdag 1 december 2010 17:04 > *To:* Discussion list for users of sipXecs software > *Subject:* Re: [sipx-users] Group call pickup > > > > Are you doing an alias pickup? or picking up the extension of a ringing > phone? whether by group or not, is the same line registered on one or more > phones involved? > > On Wed, Dec 1, 2010 at 10:51 AM, Henry Dogger <[email protected]> > wrote: > > Hi all, > > > > I know group call pickup is not supported as such in SipXecs. > > But I found a work-around > http://track.sipfoundry.org/browse/XX-4775?focusedCommentId=53934#action_53934provided > by Dale. > > I tried this but with no luck. > > I’m using 4.2.1 and only polycom phones. > > What can I be doing wrong? > > > > Kind regards, > > > > Henry Dogger > > Telecats BV > > > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > > > > -- > ====================== > Tony Graziano, Manager > Telephone: 434.984.8430 > sip: [email protected] > Fax: 434.326.5325 > > Email: [email protected] > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > sip: [email protected] > > Helpdesk Contract Customers: > http://support.myitdepartment.net > > > > Blog: > > http://blog.myitdepartment.net > > > > Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 > > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- There are 10 kinds of people in this world, those who understand binary and those who don't. [email protected] blog: http://www.sipxecs.info call: sip:[email protected] <sip%[email protected]>
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
