i think the question was specifically a DNS question:
> set type=srv
> _sip._udp.ot.bandwidth.com
Server: google-public-dns-a.google.com
Address: 8.8.8.8
Non-authoritative answer:
_sip._udp.ot.bandwidth.com SRV service location:
priority = 20
weight = 5
port = 5060
svr hostname = sp-udp01.snv.bandwidth.com
_sip._udp.ot.bandwidth.com SRV service location:
priority = 10
weight = 5
port = 5060
svr hostname = sp-udp01.iad.bandwidth.com
> set type=a
> sp-udp01.iad.bandwidth.com
Server: google-public-dns-a.google.com
Address: 8.8.8.8
Non-authoritative answer:
Name: sp-udp01.iad.bandwidth.com
Address: 216.82.224.202
I think the day it was asked Comcast and a bunch of others had some really
boogered DNS issues.
On Fri, Dec 3, 2010 at 4:37 PM, Becker, Jesse <[email protected]>wrote:
> I am using bandwidth.com at one site as well. Same information as provided
> Matthew. I setup as an ISTP using the SipXBridge which requires have
> bandwidth.com to send incoming calls to 5080, however, your outbound calls
> will go to them on 5060.
>
> Jes
>
>
> On Thu, Dec 2, 2010 at 2:30 PM, Matthew Kitchin (public/usenet) <
> [email protected]> wrote:
>
>> On 12/2/2010 1:11 PM, M. Ranganathan wrote:
>> > Hello all,
>> >
>> > Is anybody using bandwidth.com trunks? What is their SIP address? I
>> > just tested and much to my surprise, found I could not resolve that
>> > name.
>> >
>> > Has this changed?
>> >
>> > Thanks
>> >
>> > Ranga
>> >
>> This is what they sent me for one trunk I did.
>>
>> PBX Configurations required for Bandwidth.com SIP Trunks:
>> • Please turn off registrations and any SIP username/password—they are
>> not required and will hinder functionality. (except Switchvox and
>> Altigen PBX's)
>> • Bandwidth.com Primary inbound gateway IP: 216.82.224.202 port 5060
>> SIP/UDP
>> • Bandwidth.com Secondary inbound gateway IP: 216.82.225.202 port 5060
>> SIP/UDP
>> • Bandwidth.com Primary outbound gateway IP: 216.82.224.202 port 5060
>> SIP/UDP
>> • Bandwidth.com Secondary outbound gateway IP: 216.82.225.202 port 5060
>> SIP/UDP
>> • DTMF: RFC2833
>> • Supported Codecs: G.711Ulaw and G.729A
>> • SIP REFER is not supported, please use SIP REINVITE
>> • Inbound and Outbound Numbers can be formatted in the following formats:
>>
>> _______________________________________________
>> sipx-users mailing list
>> [email protected]
>> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>>
>
>
>
> --
>
> Jesse Becker | Technical Manager
> CCNA | Network+ | Linux+ Certified Professional
> SunGard Higher Education @ SUNY Ulster
> 491 Cottekill Road, Stone Ridge, NY 12484
> Tel 845-687-5064 | Fax 845-687-5105
> [email protected] | www.sunyulster.edu
>
> <http://www.sunyulster.edu/>
>
> Check out our knowledge base:
> http://kb.sunyulster.edu<http://kb.sunyulster.edu/>
>
>
>
> _______________________________________________
> sipx-users mailing list
> [email protected]
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>
--
======================
Tony Graziano, Manager
Telephone: 434.984.8430
sip: [email protected]
Fax: 434.326.5325
Email: [email protected]
LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
sip: [email protected]
Helpdesk Contract Customers:
http://support.myitdepartment.net
<http://support.myitdepartment.net>Blog:
http://blog.myitdepartment.net
Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users/
