Tony, Thanks for your recommendations and quick response, and I did try to upgrade a couple weeks ago but encounter errors related to the repo settings. What are the correct repo setting that should be used at this time?
Regards, Warren K. Wiemer Office: 352-350-1735 Fax: 877-273-4399 "Tony Graziano" <[email protected]> wrote: >I would strongly suggest you update to the 4.2.1 stable build and see >if it >is still a problem. If it is, a proper call trace would be needed. >============================ >Tony Graziano, Manager >Telephone: 434.984.8430 >Fax: 434.984.8431 > >Email: [email protected] > >LAN/Telephony/Security and Control Systems Helpdesk: >Telephone: 434.984.8426 >Fax: 434.984.8427 > >Helpdesk Contract Customers: >http://www.myitdepartment.net/gethelp/ > >----- Original Message ----- >From: [email protected] ><[email protected]> >To: [email protected] <[email protected]> >Sent: Thu Dec 09 14:24:46 2010 >Subject: [sipx-users] Inbound Call Handling Issues > >Two days ago we began to experience isolated issues with select inbound >calls from our local calling area. The callers either can not be heard, >or >the inbound calls do not get delivered properly. I alerted our ITSP >(Bandwidth.com) about these issues and they provided the following >response >earlier... > >Your 200 ok is coming back with a contact field that the carrier cannot >interpret. The ~ are an incorrect character that they cannot >interpret. > >U 2010/12/09 16:28:39.885329 67.78.140.8:5060 -> 216.82.224.202:5060 >SIP/2.0 >200 OK. Record-Route: <sip:216.82.224.202;lr;ftag=VPSF506071629460>. >Record-Route: <sip:67.231.8.93;lr=on;ftag=VPSF506071629460>. Via: >SIP/2.0/UDP 216.82.224.202;branch=z9hG4bKf4cc.cb324f72.0. Via: >SIP/2.0/UDP >67.231.8.93;branch=z9hG4bKf4cc.63a920f2.0. Via: SIP/2.0/UDP >4.68.250.148:5060;branch=z9hG4bK506071629460-1257211244938. From: >"ADVANCE >TECHNOL" < sip:[email protected] >;tag=VPSF506071629460. To: < >sip:[email protected]:5060 >;tag=776224666. Call-ID: >[email protected]. CSeq: 1 INVITE. Server: >sipXecs/4.2.0 sipXecs/sipxbridge (Linux). Contact: ><sip:[email protected]:5080;transport=udp>. > >No changes have been made to the SipX server that I am aware of, and I >have >checked the configs and do not see any areas where these issues"~" >characters are intentionally set. I have also rebooted the SipX Server >and >the internet firewall which handles the call traffic but we are still >experiencing the same problems. It is just land line calls from our >local >call area as other regional and long distance call, as well as all >cellular >incoming calls work fine and there have been no issues with outbound >calling >even to the local area. > >Can anyone offer insight as to what could be causing these issues, or >other >areas to checkout? > >Regards, > >Warren K. Wiemer > >_______________________________________________ >sipx-users mailing list >[email protected] >List Archive: http://list.sipfoundry.org/archive/sipx-users/ >_______________________________________________ >sipx-users mailing list >[email protected] >List Archive: http://list.sipfoundry.org/archive/sipx-users/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
