I found an issue <http://track.sipfoundry.org/browse/XX-6045> http://track.sipfoundry.org/browse/XX-6045, that looks to deal with exactly my problem. And it is marked fixed. In 4.2.
_____ From: [email protected] [mailto:[email protected]] On Behalf Of Nikolay Kondratyev Sent: Thursday, January 27, 2011 5:16 PM To: 'Discussion list for users of sipXecs software' Subject: Re: [sipx-users] interconnect with CS1000 The description of the "Strip User Parameters" check box in the registrar configuration is Remove all semicolon-delimited parameters from the userpart of local SIP addresses. For example, convert 'sip:user;[email protected]' to 'sip:[email protected]' when the local domain is 'example.com'. that is this checkbox is intended to do exactly what i need - remove ";phone-context=cdp.udp" from the request uri. (Or may be more precisely would be: registrar will disregard this string). So... is this checkbox known to work in 4.2.1? In 4.2.0? in 4.4.0? Are there any users that use sipx with SC1000? Any ideas how to solve the problem would be greatly appreciated. Thanks and regards, Nikolay. _____ From: [email protected] [mailto:[email protected]] On Behalf Of Nikolay Kondratyev Sent: Thursday, January 27, 2011 3:23 PM To: 'Discussion list for users of sipXecs software' Subject: [sipx-users] interconnect with CS1000 Hi all, i have a problem interconnecting sipx (4.2.1 and 4.4.0) to cs1000 (version 7.00.20). The problem is that CS1000 sends invite in the following form: INVITE sip:4002;phone-context=cdp.udp@"mydomain":5080;maddr=<ip addr>;transport=tcp;user=phone;x-nt-redirect=redirect-server SIP/2.0 and finally sipxregistrar answers "not found". As far as i understand the problem is in the ";phone-context=cdp.udp" string of the sip uri. In the maillist archive i found some discussions about that... sipx guru's said that the problem was on the cs1000 side. I found the checkbox "Strip User Parameters" in the registrar configuration. checked it. Nothing changed. I tried to route calls through sipxbridge and directly to sipxproxy. With the same result - "Not found". So can anybody please shed some light on the following: 1. Is it possible to solve the problem on the sipx side? 2. May be some special configuration is required on the CS1000 side? Can anybody please advise what to do? I'm ready to provide any additional info if needed. Thanks in advance, Nikolay.
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
