Looks good so far. We did all of our programming by hand, the cradle arrived today...
Thanks, Mark W. Wood office: (760)202-0224 X2010 [cid:[email protected]] www.redphonetech.com From: Matthew Kitchin (public/usenet) [mailto:[email protected]] Sent: Thursday, May 19, 2011 1:06 PM To: Discussion list for users of sipXecs software Subject: Re: [sipx-users] Polycom 8002 I've got a decent start on an entry for the 8020. http://wiki.sipfoundry.org/display/sipXecs/Configuring+Polycom+Spectralink+8020+WiFi+phones On 5/18/2011 4:31 AM, Michael Picher wrote: One or both of you might want to put some notes in the wiki regarding both of these devices. On Fri, May 13, 2011 at 8:13 PM, Matthew Kitchin (usenet/public) <[email protected]<mailto:[email protected]>> wrote: For what its worth, you now qualify as multiple. You are the second in the last month or so to post about that model. You seem to have received a more thorough response than the last person. I bought an 8020 first go around several months ago. After a week or 2, I gave up and returned it. I tried out 5 or so other brands. I got one cisco/linksys model to work pretty well, and they end of lifed it. After lots of dead ends, I went back to polycom and talked with their sales and engineering team. They were confident the 8020 would work for me, so I bought it again. At their recommendation, I bought a cradle that allowed me to use th admin tool. I got a lot farther, but it was crashing on inbound calls (I think). We did probably 20 rounds of wifi wireshark captures and firmware updates. They were very responsive. We resolved every situation except transfers. They and the sipx developers decided it was my ITSP dropping the call. My ITSP, Verizon, agreed. I have not had time to tr oubleshoot that with them, and it isn't really important for my setups. So, the 8020 is working well for us. -----Original Message----- From: Mark Wood <[email protected]<mailto:[email protected]>> Sender: [email protected]<mailto:[email protected]> Date: Fri, 13 May 2011 14:45:59 To: 'Discussion list for users of sipXecs software'<[email protected]<mailto:[email protected]>> Reply-To: Discussion list for users of sipXecs software <[email protected]<mailto:[email protected]>> Subject: Re: [sipx-users] Polycom 8002 _______________________________________________ sipx-users mailing list [email protected]<mailto:[email protected]> List Archive: http://list.sipfoundry.org/archive/sipx-users/ _______________________________________________ sipx-users mailing list [email protected]<mailto:[email protected]> List Archive: http://list.sipfoundry.org/archive/sipx-users/ -- There are 10 kinds of people in this world, those who understand binary and those who don't. [email protected]<mailto:[email protected]> blog: http://www.sipxecs.info call: sip:[email protected]<mailto:sip%[email protected]>
<<inline: image001.png>>
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
