Thanks, but customer was not using STUN, but Specific IP address.
Sven ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Michael Picher Sent: 09 June 2011 17:00 To: Discussion list for users of sipXecs software Subject: Re: [sipx-users] Incoming call does not hit dial plan. Check stun server... stun01.sipphone.com is no longer valid. you can use stun.ezuce.com Mike On Thu, Jun 9, 2011 at 11:53 AM, Sven Evensen <[email protected]> wrote: The system/domain and Internet Calling both look correct. And there is only one single GW involved. Sven ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Gerald Drouillard Sent: 09 June 2011 16:41 To: [email protected] Subject: Re: [sipx-users] Incoming call does not hit dial plan. On 6/9/2011 11:32 AM, Sven Evensen wrote: Hi We have a partner who has deployed a number of sipx servers based on a reference build they have. All servers are on the same MPLS network using the same SIP trunk. One new deployment is having problems with incoming calls. The INVITE looks perfectly normal, goes via sipxBridge and sipxProxy to sipRegistrar, but I cannot see that the To: number is stripped in the dial plan. The call fails, one time it looped back out to the SIP trunk, one time it failed with 407 Proxy Authentication needed The dial plan looks correct, very simple and works on all the other servers (with different DDI ranges of course). Can I get a hint as to what could be causing this and which logs are relevant. I have the three above mentioned logs in debug plus pcap of the call. Regards, Sven If the call is going back out then you should have a look at System|Domain and make sure the IP's and domain names are there. Also look at System|Internet Calling. Do you have more than one gateway to the same ITSP? -- Regards -------------------------------------- Gerald Drouillard Technology Architect Drouillard & Associates, Inc. http://www.Drouillard.biz _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/ -- Michael Picher eZuce Director of Technical Services O.978-296-1005 X2015 M.207-956-0262 @mpicher <http://twitter.com/mpicher> www.ezuce.com
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
