make sure manual outbound nat is checked. make sure static port nat is used on all nat assignments for sipx. make sure sipxroxd is u installed in pfsense. On Jul 20, 2011 12:56 PM, "Tony Graziano" <[email protected]> wrote: > and you nature outbound is not right. refer to my blog. > On Jul 20, 2011 12:55 PM, "Tony Graziano" <[email protected]> > wrote: >> destroy your state table and restart siptrunking. >> On Jul 20, 2011 12:18 PM, "William Salt" <[email protected]> wrote: >>> I was under the impression i could use nat to NAT port 5080 externally to >>> port 5060 internally to the SBC? >>> I have just changed the ITSP to register on port 5080, and removed >>> my natting on my pfsense box, so it is natting those ports to eachother >>> internally and externally... >>> It wont register, so i will ask my ITSP. >>> >>> Regards >>> Will >>> >>> On Wed, Jul 20, 2011 at 4:36 PM, Tony Graziano < >> [email protected] >>>> wrote: >>> >>>> the itsp won;t work unless you can register to them on port 5080 and > they >>>> send you calls on port 5080. >>>> >>>> your firewall is not configured properly either and is not using >> symmetric >>>> nat. what firewall is it? >>>> >>>> consider another firewall (perhaps pfsense) >>>> >>>> http://blog.myitdepartment.net/?p=52 >>>> >>>> >>>> >>>> On Wed, Jul 20, 2011 at 11:28 AM, William Salt <[email protected] >>>wrote: >>>> >>>>> Hi Tony, >>>>> Thanks for the help. >>>>> >>>>> >>>>> 1. Im registering a static IP to the ITSP (our external one) >>>>> 2. they are sending calls to 5060, and im natting them to 6080 >>>>> internally >>>>> 3. Im not sure looks like from a tcpdump i am registering on UDP port >>>>> 5060 to them, and 62941 locally. >>>>> >>>>> From then, i am contacting the ITSP on port 5060 and they are > contacting >>>>> me on UDP 62941. >>>>> Im guessing this is because i have registered with them on that port, >> and >>>>> they are then responding to me via that port, with my firewall keeping >> the >>>>> state of that port. >>>>> >>>>> I am using pfsense 1.2.3, which shouldn't be a problem? >>>>> >>>>> Regards >>>>> Will >>>>> >>>>> >>>>> On Wed, Jul 20, 2011 at 2:46 PM, Tony Graziano < >>>>> [email protected]> wrote: >>>>> >>>>>> Are you registering or using a static IP to the ITSP? Are they sending >>>>>> the calls to port 5080 or 5060? If you register does the provider > allow >> you >>>>>> to confirm ip and port they see you registering on? >>>>>> >>>>>> It would appear (and you can confirm) that the call is coming in to >> port >>>>>> 5060 from the ITSP in the initial invite on inbound calls. >>>>>> >>>>>> Is you NAT static port NAT (symmetric ports) or dynamic? What is the >>>>>> firewall? >>>>>> On Wed, Jul 20, 2011 at 9:43 AM, William Salt < [email protected] >>>wrote: >>>>>> >>>>>>> Hi All, >>>>>>> I am new to SipXecs, but I have worked with a couple of voip >>>>>>> pbx's before. Ive got a few days to set up a PBX in our office, and > so >> far i >>>>>>> am struggling to find a solution to the problem i am experiencing. So >> id >>>>>>> really appreciate it if someone would reach out and help me. >>>>>>> >>>>>>> I have a sip trunk from aql.com, and have configured it, it seems to >>>>>>> work (mostly) >>>>>>> I can make outbound calls to mobiles, landlines etc fine, and audio >> and >>>>>>> sessions establish and terminate fine. >>>>>>> However, i cannot complete inbound calls, the internal phone will >> ring, >>>>>>> and upon answering the call will terminate, however, the external >> callers >>>>>>> call will connect and stay connected untill they hang up. >>>>>>> >>>>>>> I have my firewall + NAT rules configured correctly (ports external >>>>>>> 5080-5081 = 5060-5601 internally + 30000-31000) >>>>>>> i have configured a dialplan from the username of the VOIP provider > to >>>>>>> the internal extension. >>>>>>> >>>>>>> I have wireshark dumps, and a snapshot if anyone would have a look at >>>>>>> these, and possibly help diagnose my problems, i would >>>>>>> greatly appreciate this. >>>>>>> >>>>>>> Regards >>>>>>> Will >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> sipx-users mailing list >>>>>>> [email protected] >>>>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> ====================== >>>>>> Tony Graziano, Manager >>>>>> Telephone: 434.984.8430 >>>>>> sip: [email protected] >>>>>> Fax: 434.326.5325 >>>>>> >>>>>> Email: [email protected] >>>>>> >>>>>> LAN/Telephony/Security and Control Systems Helpdesk: >>>>>> Telephone: 434.984.8426 >>>>>> sip: [email protected] >>>>>> >>>>>> Helpdesk Contract Customers: >>>>>> http://support.myitdepartment.net >>>>>> >>>>>> <http://support.myitdepartment.net>Blog: >>>>>> http://blog.myitdepartment.net >>>>>> >>>>>> Linked-In Profile: > http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> sipx-users mailing list >>>>>> [email protected] >>>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> sipx-users mailing list >>>>> [email protected] >>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>>> >>>> >>>> >>>> >>>> -- >>>> ====================== >>>> Tony Graziano, Manager >>>> Telephone: 434.984.8430 >>>> sip: [email protected] >>>> Fax: 434.326.5325 >>>> >>>> Email: [email protected] >>>> >>>> LAN/Telephony/Security and Control Systems Helpdesk: >>>> Telephone: 434.984.8426 >>>> sip: [email protected] >>>> >>>> Helpdesk Contract Customers: >>>> http://support.myitdepartment.net >>>> >>>> <http://support.myitdepartment.net>Blog: >>>> http://blog.myitdepartment.net >>>> >>>> Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >>>> >>>> >>>> _______________________________________________ >>>> sipx-users mailing list >>>> [email protected] >>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>>
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
