Pointedly, you need to ensure that sipxroxd package is not installed (this is a default in pfsense 1.2.3, if so simply remove the package).
Secondly, "most" itsp's will allow you to register on a port other than 5060. The default for a lot of itsp's is to send you a call on port 5080 if you register on port 5080. You really ought to confirm that you both REGISTER on 5080. Once a transaction has begun, it can be on port 5060. The only thing we "care" abour is where the invite for a new call comes from. Reinvites and other dialog DURING the call and outbound calls to them can be on port 5060. So, if you did a pcap, does the INVITE for an incoming call COME on port 5080? If not, it sounds like they do not support either registrations OR sending call son port 5080? You really need to ask the ITSP very pointed questions, or you will get nowhere. Ask if they can send on port 5080 with either a registration or a static ip address. If the answer to other is no, I'd shop around. Sometimes you have to ask and they can make adjustments within their systems you do not have access to. On Wed, Jul 20, 2011 at 3:40 PM, William Salt <[email protected]>wrote: > I have now set symmetric nat internally and externally for ports 5060-5061 > 5080-5081 and 30000-31000. > I still get the same problem of the inbound call failing on pickup. > > I have tcp dumped the ITSP registration process and i see the pbx asking > for a reply on 5080, but instead i see the ITSP (aql.com) replying on > 5060. > > Is this the ITSPs problem, would a fix be to use another UK based ITSP > (any recommendations?) > > Cheers > Will > > > On Wed, Jul 20, 2011 at 6:38 PM, Tony Graziano < > [email protected]> wrote: > >> make sure manual outbound nat is checked. make sure static port nat is >> used on all nat assignments for sipx. make sure sipxroxd is u installed in >> pfsense. >> On Jul 20, 2011 12:56 PM, "Tony Graziano" <[email protected]> >> wrote: >> > and you nature outbound is not right. refer to my blog. >> > On Jul 20, 2011 12:55 PM, "Tony Graziano" <[email protected] >> > >> > wrote: >> >> destroy your state table and restart siptrunking. >> >> On Jul 20, 2011 12:18 PM, "William Salt" <[email protected]> >> wrote: >> >>> I was under the impression i could use nat to NAT port 5080 externally >> to >> >>> port 5060 internally to the SBC? >> >>> I have just changed the ITSP to register on port 5080, and removed >> >>> my natting on my pfsense box, so it is natting those ports to >> eachother >> >>> internally and externally... >> >>> It wont register, so i will ask my ITSP. >> >>> >> >>> Regards >> >>> Will >> >>> >> >>> On Wed, Jul 20, 2011 at 4:36 PM, Tony Graziano < >> >> [email protected] >> >>>> wrote: >> >>> >> >>>> the itsp won;t work unless you can register to them on port 5080 and >> > they >> >>>> send you calls on port 5080. >> >>>> >> >>>> your firewall is not configured properly either and is not using >> >> symmetric >> >>>> nat. what firewall is it? >> >>>> >> >>>> consider another firewall (perhaps pfsense) >> >>>> >> >>>> http://blog.myitdepartment.net/?p=52 >> >>>> >> >>>> >> >>>> >> >>>> On Wed, Jul 20, 2011 at 11:28 AM, William Salt < >> [email protected] >> >>>wrote: >> >>>> >> >>>>> Hi Tony, >> >>>>> Thanks for the help. >> >>>>> >> >>>>> >> >>>>> 1. Im registering a static IP to the ITSP (our external one) >> >>>>> 2. they are sending calls to 5060, and im natting them to 6080 >> >>>>> internally >> >>>>> 3. Im not sure looks like from a tcpdump i am registering on UDP >> port >> >>>>> 5060 to them, and 62941 locally. >> >>>>> >> >>>>> From then, i am contacting the ITSP on port 5060 and they are >> > contacting >> >>>>> me on UDP 62941. >> >>>>> Im guessing this is because i have registered with them on that >> port, >> >> and >> >>>>> they are then responding to me via that port, with my firewall >> keeping >> >> the >> >>>>> state of that port. >> >>>>> >> >>>>> I am using pfsense 1.2.3, which shouldn't be a problem? >> >>>>> >> >>>>> Regards >> >>>>> Will >> >>>>> >> >>>>> >> >>>>> On Wed, Jul 20, 2011 at 2:46 PM, Tony Graziano < >> >>>>> [email protected]> wrote: >> >>>>> >> >>>>>> Are you registering or using a static IP to the ITSP? Are they >> sending >> >>>>>> the calls to port 5080 or 5060? If you register does the provider >> > allow >> >> you >> >>>>>> to confirm ip and port they see you registering on? >> >>>>>> >> >>>>>> It would appear (and you can confirm) that the call is coming in to >> >> port >> >>>>>> 5060 from the ITSP in the initial invite on inbound calls. >> >>>>>> >> >>>>>> Is you NAT static port NAT (symmetric ports) or dynamic? What is >> the >> >>>>>> firewall? >> >>>>>> On Wed, Jul 20, 2011 at 9:43 AM, William Salt < >> [email protected] >> >>>wrote: >> >>>>>> >> >>>>>>> Hi All, >> >>>>>>> I am new to SipXecs, but I have worked with a couple of voip >> >>>>>>> pbx's before. Ive got a few days to set up a PBX in our office, >> and >> > so >> >> far i >> >>>>>>> am struggling to find a solution to the problem i am experiencing. >> So >> >> id >> >>>>>>> really appreciate it if someone would reach out and help me. >> >>>>>>> >> >>>>>>> I have a sip trunk from aql.com, and have configured it, it seems >> to >> >>>>>>> work (mostly) >> >>>>>>> I can make outbound calls to mobiles, landlines etc fine, and >> audio >> >> and >> >>>>>>> sessions establish and terminate fine. >> >>>>>>> However, i cannot complete inbound calls, the internal phone will >> >> ring, >> >>>>>>> and upon answering the call will terminate, however, the external >> >> callers >> >>>>>>> call will connect and stay connected untill they hang up. >> >>>>>>> >> >>>>>>> I have my firewall + NAT rules configured correctly (ports >> external >> >>>>>>> 5080-5081 = 5060-5601 internally + 30000-31000) >> >>>>>>> i have configured a dialplan from the username of the VOIP >> provider >> > to >> >>>>>>> the internal extension. >> >>>>>>> >> >>>>>>> I have wireshark dumps, and a snapshot if anyone would have a look >> at >> >>>>>>> these, and possibly help diagnose my problems, i would >> >>>>>>> greatly appreciate this. >> >>>>>>> >> >>>>>>> Regards >> >>>>>>> Will >> >>>>>>> >> >>>>>>> >> >>>>>>> _______________________________________________ >> >>>>>>> sipx-users mailing list >> >>>>>>> [email protected] >> >>>>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> >>>>>>> >> >>>>>> >> >>>>>> >> >>>>>> >> >>>>>> -- >> >>>>>> ====================== >> >>>>>> Tony Graziano, Manager >> >>>>>> Telephone: 434.984.8430 >> >>>>>> sip: [email protected] >> >>>>>> Fax: 434.326.5325 >> >>>>>> >> >>>>>> Email: [email protected] >> >>>>>> >> >>>>>> LAN/Telephony/Security and Control Systems Helpdesk: >> >>>>>> Telephone: 434.984.8426 >> >>>>>> sip: [email protected] >> >>>>>> >> >>>>>> Helpdesk Contract Customers: >> >>>>>> http://support.myitdepartment.net >> >>>>>> >> >>>>>> <http://support.myitdepartment.net>Blog: >> >>>>>> http://blog.myitdepartment.net >> >>>>>> >> >>>>>> Linked-In Profile: >> > http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >> >>>>>> >> >>>>>> >> >>>>>> _______________________________________________ >> >>>>>> sipx-users mailing list >> >>>>>> [email protected] >> >>>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> >>>>>> >> >>>>> >> >>>>> >> >>>>> _______________________________________________ >> >>>>> sipx-users mailing list >> >>>>> [email protected] >> >>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> >>>>> >> >>>> >> >>>> >> >>>> >> >>>> -- >> >>>> ====================== >> >>>> Tony Graziano, Manager >> >>>> Telephone: 434.984.8430 >> >>>> sip: [email protected] >> >>>> Fax: 434.326.5325 >> >>>> >> >>>> Email: [email protected] >> >>>> >> >>>> LAN/Telephony/Security and Control Systems Helpdesk: >> >>>> Telephone: 434.984.8426 >> >>>> sip: [email protected] >> >>>> >> >>>> Helpdesk Contract Customers: >> >>>> http://support.myitdepartment.net >> >>>> >> >>>> <http://support.myitdepartment.net>Blog: >> >>>> http://blog.myitdepartment.net >> >>>> >> >>>> Linked-In Profile: >> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >> >>>> >> >>>> >> >>>> _______________________________________________ >> >>>> sipx-users mailing list >> >>>> [email protected] >> >>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> >>>> >> >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.326.5325 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Contract Customers: http://support.myitdepartment.net <http://support.myitdepartment.net>Blog: http://blog.myitdepartment.net Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
