correct and what you would find in your current version is that if you restarted presence it might hang shutting down. so if you attempt this you are forwarned that a reboot might be needed. On Aug 31, 2011 4:54 PM, "Michael Picher" <[email protected]> wrote: > Go to 4.4.0. Presence would crumble at your scale in 4.2.1. > > On Wed, Aug 31, 2011 at 3:12 PM, Mike Graham <[email protected] >wrote: > >> >> Content-Type: text/plain; >> charset="utf-8" >> Content-Transfer-Encoding: 8bit >> Organization: SipXecs Forum >> X-FUDforum: 08063afcdd00a6e76393c5b9527381e8 <62982> >> Message-ID: <[email protected]> >> >> >> >> Currently running sipx 4.2 and planning on an upgrade to 4.4 >> in the near future. I've run into an issue where the status >> lights on my Polycom phones stop functioning correctly after >> awhile. It seems to only be related to certain phones, but >> without any consistency. >> >> After a clean restart of the presence system, status lights >> show correctly for a period of time, but eventually begin to >> either stick "on call" or do not light up at the appropriate >> time. This is a large installation with 700+ users. >> >> Mike >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > > > > -- > Michael Picher > eZuce > Director of Technical Services > O.978-296-1005 X2015 > M.207-956-0262 > @mpicher <http://twitter.com/mpicher> > www.ezuce.com
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
